3Com 3C892 manual Configuring the Isdn LAN Modem, Typical Configuration, Before You Begin

CONFIGURING THE ISDN LAN

5 MODEM

	This chapter describes how to configure the ISDN LAN Modem for the typical
	configuration. The typical configuration covers the basic setup and includes what
	most users need to get up and running. It provides instructions for setting up your
	ISDN line and connecting to the Internet. If you followed the instructions in the
	Getting Started Guide, you have already set up the typical configuration. To see if
	there are any additional changes you would like to make, you may want to look
	over Chapter 6, “Advanced Configuration.”
	The configuration windows shown in this chapter may differ slightly from what is
	displayed on your computer.
Typical Configuration	The typical configuration covers the following main steps.
	Launch
	Web Browser
	Run
	SPID Wizard
	Run
	ISP Wizard
	Verify
	Configuration
	Figure 34 Main Steps for Typical Configuration
Before You Begin	Make sure that you have done the following.

You Should Have Done Before you configure the ISDN LAN Modem, you should have already done the This following:

■Installed the hardware as described in Chapter 3, “Hardware Description and Installation.”

■Installed and set up TCP/IP on all computers you intend to connect to the ISDN LAN Modem. If TCP/IP is not installed and set up, refer to Chapter 4.