CP80/CP81

L1 L2

control card

TEST

 

 

STATUS

 

SET

SETTING GATE LIMITS (continued)

NB. Ensure you follow the correct procedure!

The procedure for setting D3/D5 and A5 motors is DIFFERENT. The A5 limits have to be set manually (see page 25 and 26), while the D3/D5 motors set their limits automatically (see page 21 to 23).

D3/D5 ONLY (PAGE 23, 24, 25)

-Press the TEST pushbutton while monitoring LED L1.

-When L1 flashes once, release TEST pushbutton. L2 will go out,

L1 will continue to flash once per second. Controller is now in MENU 1 which sets gate limits.

NB. Understand the procedure detailed on page 24 before continuing.

The controller is about to perform the fully automatic setup routine.

CP80/CP81

L1

L2

control card

TEST

 

 

STATUS

 

 

SET

START AUTOMATED GATE LIMITS ROUTINE

-Press TEST pushbutton until STATUS LED illuminates.

-AUTOMATIC set up routine (described on page 24) starts as soon as TEST button is released.

23

Page 25
Image 25
Centurion CP72SR5 installation manual Setting Gate Limits, Start Automated Gate Limits Routine