Ricoh AP306D operating instructions Menu Settings, IPDL-C Menu, RPS2 Menu

Using the Operation Panel

Menu Settings

IPDL-C Menu

The following are the settings you can make with “IPDL-C Menu”.

Note

❒Italicized settings indicate default settings.

❖1. Job Timeout

You can set how many seconds the printer waits before terminating a print job when the printer does not receive the end of that print job. “000 Off” is endless wait. The job is automatically cancelled if time runs out.

•000 Off

•1 to 999 seconds by 1

5 ❖ 2. I/O Timeout

You can set how many seconds the printer waits for more print data before ending its waiting condition for data and terminating a job. “000 Off” is end- less wait. The job is automatically cancelled if no data is received for the se- lected time.

•000 Off

•1 to 999 seconds by 1 (999 seconds)

RPS2 Menu

The following are the settings you can make with “RPS2 Menu”. The settings made with the printer driver normally take priority, except when a printer driv- er setting is set to use the printer's settings.

Note

❒Italicized settings indicate default settings.

❖1.Color Level

You can select the number of colors used per dot to [1 bit] or [2 bit].

•1 bit

•2 bit

❖2.Color Mode

You can select either monochrome or color printing.

•Color

•Black & White

90