Ricoh AP306D Changing the Printer Language, Menu Select PDL, Select PDL j Option#1 RPS2 l

Using the Operation Panel

❖32. IP Address – 39. Active PTL.

These items appear when the optional Network Interface Board is installed in the printer.

Reference

⇒the "Setup Guide" that comes with the printer

Changing the Printer Language

This section describes how to change the printer language on the operation pan- el. Changing IPDL-C or RICOH-SCRIPT2 (RPS2) is required when you set the menu for each printer language.

A Press {Menu}.
	On Line Reset		Escape
5	Menu	Media	Enter
Power	Error		Data In
			TFWS020E

The following message appears on the panel display.

<Menu>	j
IPDL-C Menu	l

BPress {T} or {U} to display "Select PDL", and then press {Enter}.

<Menu>	j
Select PDL	l

CPress {T}or {U}to display the printer language you want to use, and then press {Enter}.

<Select PDL> j

Option#1 RPS2 l

DPress {On Line}.

The "Ready" message appears on the panel display.

Confirm that the selected printer language appears on the panel display.

98