Ricoh AP306D operating instructions Tray Size, Bypass Use, O Buffer

Menu Settings

❖2. Tray Size[*]

You can select the size of the paper tray whenever you set the paper size dial to “p”.

•B4 JIS

•B5 JIS

•8.5×5.5

•8x13

•8.25x13

•8.5×13

•A5

Note

❒The paper size specified here is applied to all paper trays ( Tray 1, 2 and 3 excluding the bypass tray). You cannot select the paper size individually for each tray.

❒ A5 and Half Letter are supported only by Tray 1. If you select A5, Tray 2
	5
and 3 ignore the setting, and the default paper size (8.5×13) will be selected

automatically. For more information about loading paper, see P.30 “Load- ing Paper”.

❖3. Bypass Use

You can select whether or not the printer should be searched the bypass tray when "Auto Tray Select" is selected in "Paper Tray:" using the printer driver. Selecting "Manual" is not searched the bypass tray.

The paper size setting selected with the printer driver overrides the one se- lected with the operation panel.

•Manual

•Auto/Tray

Note

❒ This item is available when the printer language is set to IPDL-C.

❖4. I/O Buffer

You can select the size of the I/O buffer. Normally it is not necessary to change this setting.

• 16KB

• 32KB

• 64KB

• 128KB

• 256KB

• 512KB

95