Ricoh AP306D Menu System Menu, System Menu j 1.Paper Tray l, Tray Size* j 5x13 l

Using the Operation Panel

BPress {T} or {U} to display the screen for the setting you want to change, and then press {Enter}.

<Menu>	j
System Menu	l

The following message appears on the panel display.

<System Menu> j 1.Paper Tray l

CPress {T} or {U} to display the screen for the menu item you want to change, and then press {Enter}.

5

<System Menu> j 2.Tray Size[*]l

An asterisk (“*”) is indicated at the left side of the currently selected item.

<Tray Size[*]> j

*8.5x13 l

DPress {T} or {U} to display the screen for the setting you want to change, and then press {Enter}.

<Tray Size[*]> j

8.25x13 l

This registers the setting.

ERepeat steps C and D to change other settings.

FPress {On Line}.

The following message appears on the panel display.

Take Offline

Then Press Reset

GPress {On Line}.

The On Line indicator stays off and the printer enters offline.

H Press {Reset}.

This restarts the printer with the new settings.

Note

❒ You can check the current menu settings by printing a configuration page.

84

⇒ P.99 “Printing the Configuration Page”