Chip PC CDC01927 Jack PC Hardware User Manual - Training Department Version, Secure with 4 screws

Jack PC Hardware User Manual - Training Department

Version 0506

5Insert the RJ-45 Termination Connector Block into the Flex-Jack Housing bottom part until you hear a clicking sound indicating it has locked properly into place.

6Place the Flex-Jack Housing inside the Jack hole. Trim wall cutout if necessary.

7Test the Flex-Jack has current before you continue.

Make sure that the Flex-Jack Housing is fully inserted, level- headed and that the Housing contacts are located at the bottom part as shown in picture.

Secure with 4 screws.

8Gently clean the Flex-Jack Housing contacts from dust, debris and other objects.

13