Chip PC CDC01927 manual

Jack PC Hardware User Manual - Training Department

Version 0506

Connect at the far end a simple 4 ports LAN switch

Switch	Yes
configuration /	Problem resolved?
port problem

No

Check:

∙That the cable connected is the one you are testing at the far end (might be labeling problem) - check the port is working with another device

∙The patch panel contacts and labeling

∙That the Flex-Jack Terminal block contacts are not contaminated.

∙Connect Flex-Jack LAN Jack in to the Flex- Jack housing and use LAN cable tester to check the cable (If cable tester not available – connect a laptop computer and check for LAN connectivity)

Press again the cable wires into the terminal block. Check that wire insulation penetrated by each terminal.

Yes	Problem resolved?
Finished

No

Replace LAN cabling / try another cable

37