Chip PC CDC01927 Environmental & Regulatory Detailed Information, A. System Dimensions and Weight

Jack PC Hardware User Manual - Training Department

Version 0506

ENVIRONMENTAL & REGULATORY DETAILED INFORMATION

A. System Dimensions and Weight

Configuration	Depth, cm	Width, cm	Height, cm	Weight, kg
With decorative frame	3.6	8.6	8.6	0.35
Without decorative frame	3.6	5.8	5.8	0.25

B. Declarations and Certifications

B1. regulatory compliance Information

This system received the following approvals and may be labeled with one or more of these marks depending on point of purchase:

Approvals	Certificate #/Standard	Yes / No / N/A
Energy Saving
USA: Energy Star Compliance	N/A	Yes
EMC/EMI (Electro-Magnetic Compliance/Interference):
	EN55022 Class B, EN61000-3-2/3, EN55024
	CISPR 22:1997 Class A Radiated, Power line Conducted
	EN 50081-1:1992 Emissions- Residential, Commercial
	EN 55022:1998 Class A Radiated, Power line Conducted
	EN 61000-3-2:1995 Power Line Conducted Emissions
European EU – CE Mark	EN 61000-3-3:1995 Power Line Fluctuation and Flicker	Yes
	EN 55024:1998 Immunity- Information Technology
	Equipment
	EN 61000-4-2:1995 Electro-Static-Discharge (ESD)
	EN 61000-4-3:1997 Radiated Susceptibility
	EN 61000-4-4:1995 Electrical Fast Transient Burst
USA - FCC Mark	47CFR FCC Part 15, Subpart B:2003 Class B Commercial	Yes
	Equipment
Japan - VCCI Mark	N/A	Yes
Safety
European EU	EN/IEC 60950-1:2001 Safety for Information Technology	Yes
	Equipment
USA & Canada - cUL	UL/cUL 60950-1:2003 Safety for Information Technology	Yes
	Equipment (UL File # E17001)
B2. US fcc Information

This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: If you make any modification to the equipment not expressly approved by DTI, you could void your authority to operate the equipment.

45