Jack PC Hardware User Manual - Training Department
Version 0506
9Test the Flex-Jack has current before you continue.
The Jack PC device should be inserted with the contacts (shown in the picture) facing downwards, as shown in the picture.
10Insert the Jack PC device into the Housing until you hear a clicking sound indicating the device has locked properly into place.
Verify device locking by gently pulling device outwards.
Where using PoE check now to see that the Power/Fail LED is illuminated in green, and that the Link LED is lighted if not use the troubleshooting guide.
If the device is not locked, remove the unit, and make sure that the latch locking hole is intact and is free from foreign objects. If you are still unable to lock the unit, try using a different Metal Housing.
12Connect Keyboard, Mouse, Monitor and any other required peripheral to device ports.
For additional instructions on how to connect your peripheral devices, see paragraph 3.6.
Note: In case a
You can connect the Jack PC to a Wireless network using the Wireless LAN USB dongle 802.11g (Chip PC part number: CPN02302).
Purchase all accessories only from Chip PC to assure compatibility, for more details please see the accessories list.
19
