Chip PC CDC01927 manual Connecting the Cables

Jack PC Hardware User Manual - Training Department

Version 0506

3.6Connecting the Cables

See section 3.3. for a complete overview of all connectors of your Jack PC device.

Connect USB peripheral device (USB keyboard, mouse, printer etc.) to a USB port.

Note: USB devices may be connected after product being powered although some devices would not work properly due to driver loading problems. In this case, Press the Reset Button and the USB devices will work properly.

Connect the monitor video cable to the Display connector, and connect the monitor power cable to a power source and turn the monitor ON.

Note: Models EFI6700-6800 support only Analog displays. Model EFI-6900 supports both Analog and DVI displays, to use an Analog display you will need to purchase from Chip PC the DVI to VGA adaptor cable (see Accessories list).

In case no PoE is available, connect the power adapter DC cord into the device’s DC jack, and connect the wall-mount power supply to the mains power socket. Once the Jack-PC receives power, the Power/Fail LED will blink.

Note: the device can be connected to both PoE and mains power socket (using the external power supply) simultaneously – without causing any damage to the unit. In such case the unit will work in a fail-safemode, and in case one of the sources will drop, it will automatically continue to operate using the second power source.

Note: The Power/Fail LED will change to steady green once the system finished booting up. In case a self-test procedure has failed, the Power/Fail LED will remain steady red. In this case use the troubleshooting chapter of this manual.

Connect Microphone to the Audio-In jack (pink).

Connect headphones/external speakers to the Audio-Out jack (green).

21