2-2
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide R8.5
78-18133-01
Chapter 2 CTC Operations on the ML-Series Card
Displaying ML-Series Ethernet Statistics in CTC
Refer to the Cisco ONS 15454 Troubleshooting Guide for definitions of the SONET POS parameters.
CTC displays a different set of parameters for high-level data link control ( HDLC) and frame-mapped
generic framing procedure (GFP-F) framing modes.
Displaying ML-Series Ethernet Statistics in CTC
The Ethernet statistics window lists Ethernet port-level statistics. It is similar in appearance to the POS
statistics window with different statistic parameters. The ML-Series Ethernet ports are zero based.
Display the CTC card view for the ML-Series card and click the Performance > Ether Ports tabs to
display the window. Table 2-2 describes the buttons in the EtherPorts window.
Refer to the Cisco ONS 15454 Troubleshooting Guide for definitions of the Ethernet parameters. CTC
displays a different set of parameters for HDLC and GFP-F framing modes.
Displaying ML-Series Ethernet Ports Provisioning Information on CTC
The Ethernet port provisioning window displays the provisioning status of the Ethernet ports. Click the
Provisioning > Ether Ports tabs to display this window. For ML-Series cards, the user must configure
ML-Series Ethernet ports and POS ports using the Cisco IOS CLI.
Baseline Resets the software counters (in that particular CTC client only) temporarily to zero
without affecting the actual statistics on the card. From that point on, only counters
displaying the change from the temporary baseline are displayed by this CTC client.
These new baselined counters are shown only as long as the user displays the
Performance window. If the user navigates to another CTC window and comes back
to the Performance window, the true actual statistics retained by the card are shown.
Auto-Refresh Sets a time interval for the automatic refresh of statistics.
Table 2-1 ML-Series POS Statistics Fields and Buttons
Button Description
Table 2-2 ML-Series Ethernet Statistics Fields and Buttons
Button Description
Refresh Queries the current values from the card and updates the CTC displa y.
Baseline Resets the software counters (in that particular CTC client only) temporarily to zero
without affecting the actual statistics on the card. From that point on, only counters
displaying the change from the temporary baseline are displayed by this CTC client.
These new baselined counters appear as long as the user displays the Performance
window. If the user navigates to another CTC window and comes back to the
Performance window, the true actual statistics retained by the card are shown.
Auto-Refresh Sets a time interval for the automatic refresh of statistics.