5-11
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Chapter5 Ethernet Cards
5.6.1 ML100T-12 Card-Level Indicators
Figure5-5 ML100T-12 Faceplate
ML-Series cards feature two SDH virtual ports with a maximum combined bandwidth of VC4-16c. Each
port carries an STM circuit with a size of VC3, VC4, VC4-2c, VC4-3c, VC4-4c, and VC4-8c. For
step-by-step instructions on configuring an ML-Series card SDH STM circuit, refer to the “Create
Circuits and Tunnels” chapter of the CiscoONS 15454 SDH Procedure Guide.
The ML-Series packet-over-SDH (POS) ports supports virtual concatenation (VCAT) of SONET/SDH
circuits and a software link capacity adju stment scheme (SW-LCAS). The ML-Series card supports a
maximum of two VCAT groups with each group corresponding to one of the POS ports. Each VCAT
group must be provisioned with two circuit members. An ML-Series card supports VC-3-2v, VC-4-2v
and VC-4-4c-2v. For step-by-step instructions on configuring an ML-Series card SDH VCAT circuit,
refer to the “Create Circuits and Tunnels” chapter of the CiscoONS 15454 SDH Procedure Guide.
5.6.1 ML100T-12 Card-Level Indicators
The ML00T-12 card supports two card-level LED indicators, described in Ta ble 5-1 1.
1
2
3
4
5
6
7
8
9
10
11
ACT
FAIL
ML100T
12
83647
0