Cisco Systems 15454 SDH C.4 CTC Default Settings

C-68
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
AppendixC Network Element Defaults
C.4 CTC Default Settings
C.4 CTC Default Settings
Table C -25 lists the CTC-level default settings for the Cisco ONS 15454 SDH. Cisco provides the
following types of settings preprovisioned for CTC.
•Create circuits with the Auto route check box selected by default
•Create TL1-like circuits—instructs the node to create only cross-connects, allowing the resulting
circuits to be in an upgradable state.
•Choose a default network map (which country)
NODE.timing.bits-1.AdminSSMIn STU
NODE.timing.bits-1.AISThreshold G812L
NODE.timing.bits-1.Coding HDB3
NODE.timing.bits-1.CodingOut HDB3
NODE.timing.bits-1.FacilityType E1
NODE.timing.bits-1.FacilityTypeOut E1
NODE.timing.bits-1.Framing FAS+CAS+CRC
NODE.timing.bits-1.FramingOut FAS+CAS+CRC
NODE.timing.bits-1.Sa bit 4
NODE.timing.bits-1.State unlocked
NODE.timing.bits-1.StateOut unlocked
NODE.timing.bits-2.AdminSSMIn STU
NODE.timing.bits-2.AISThreshold G812L
NODE.timing.bits-2.Coding HDB3
NODE.timing.bits-2.CodingOut HDB3
NODE.timing.bits-2.FacilityType E1
NODE.timing.bits-2.FacilityTypeOut E1
NODE.timing.bits-2.Framing FAS+CAS+CRC
NODE.timing.bits-2.FramingOut FAS+CAS+CRC
NODE.timing.bits-2.Sa bit 4
NODE.timing.bits-2.State unlocked
NODE.timing.bits-2.StateOut unlocked
NODE.timing.general.Mode External
TableC-24 Node Default Settings (continued)
Default Name Default Value Minimum Maximum