A-26
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
AppendixA Hardware Specifications
A.6 Optical Card Specifications
Weight not including clam shell: 0.2 kg (0.5 lb)
A.6 Optical Card Specifications
This section provides specifications for the optical cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information document.

A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications

The OC3 IR 4/STM1 SH 1310 card has the following specifications:
Line
Bit rate: 155.52 Mbps
Code: Scrambled non-return to zero (NRZ)
Fiber: 1310-nm single-mode
Loopback modes: Terminal and facility
Connector: SC
Compliance: ITU-T G.707, ITU-T G.957
Transmitter
Maximum transmitter output power: –8 dBm
Minimum transmitter output power: –15 dBm
Center wavelength: 1261 to 1360 nm
Nominal wavelength: 1310 nm
Transmitter: Fabry Perot laser
Extinction ratio: 8.2 dB
Dispersion ratio: 96 ps/nm
Receiver
Maximum receiver level: –8 dBm at BER 1 * 10 exp – 12
Minimum receiver level: –28 dBm at BER 1 * 10 exp – 12
Receiver: InGaAs/InP photodetector
Link loss budget: 13 dB
Receiver input wavelength range: 1261 to 1360nm
Jitter tolerance: Telcordia GR-253/ITU-T G.823 compliant
Environmental
Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
Operating humidity: 5 to 95%, noncondensing
Power consumption: 19.20 W, 0.40 A at –48 V, 65.56 BTU/hr
Dimensions