Cisco Systems 15454 SDH A

A-1

Cisco ONS 15454 SDH Reference Manual, R5.0

April 2008

APPENDIX

A

Hardware Specifications

This appendix contains hardware and software specifications for the ONS 15454 SDH.

A.1 Shelf Specifications

This section provides specifications for shelf bandwidth; a list of topologies; Cisco Transport Controller

(CTC) specifications; LAN, TL1, modem, alarm, and electrical interface assembly (EIA) interface

specifications; database, timing, power, and environmental specifications; and shelf dimensions.

A.1.1 Bandwidth

The ONS 15454 SDH has the following bandwidth specifications:

•60 Gbps per shelf

•Total bandwidth: 180 Gbps per rack (assuming there are 3 shelves)

•Data plane bandwidth: 120 Gbps per rack (assuming there are 3 shelves)

•SDH plane bandwidth: 60 Gbps per rack (assuming there are 3 shelves)

A.1.2 Configurations

The ONS 15454 SDH can be configured as follows:

•Digital cross-connect

•Terminal mode

•Linear add-drop multiplexer (ADM)

•Two-fiber multiplex section-shared protection ring (MS-SPRing)

•Four-fiber MS-SPRing

•Multiring interconnection

•Subnetwork connection protection (SNCP)

•Extended SNCP

•Virtual rings

•Hybrid SDH network topology

Contents

Main Cisco ONS 15454 SDH Reference Manual Page CONTENTS Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page About this Guide Revision History Document Objectives Audience Document Organization Related Documentation Document Conventions Page xxxiii xxxiv Page xxxvi Page Obtaining Optical Networking Information Where to Find Safety and Warning Information Cisco Optical Networking Product Documentation CD-ROM Obtaining Documentation and Submitting a Service Request Shelf and FMEC Hardware 1.1 Overview Page 1.2 Front Door 1-4 Page Page 1.3 Front Mount Electrical Connection Page 1.4 E1-75/120 Conversion Panel 1.5 Coaxial Cable 1.6 Twisted-Pair Balanced Cable 1.7 Cable Routing and Management 1.8 Fiber Management 1.9 Fan-Tray Assembly 1.9.1 Fan Speed 1.9.2 Air Filter 1.10 Power and Ground Description 1.11 Alarm, Timing, LAN, and Craft Pin Connections 1.12 Cards and Slots 1.12.1 Card Slot Requirements Page Page 1.12.2 Card Replacement 1.13 Software and Hardware Compatibility Page Page Page Page Common Control Cards 2.1 Common Control Card Overview 2.1.1 Card Summary 2.1.2 Card Compatibility 2.1.3 Cross-Connect Card Compatibility 2.2 TCC2 Card 2-5 Chapter2 Common Control Cards 2.2 TCC2 Card Note The TCC2 card supporst both 48 VDC and 60 VDC input requirements. Figure 2-1 shows the TCC2 card faceplate and block diagram. Figure2-1 TCC2 Faceplate and Block Diagram 2.2.1 TCC2 Card Functionality 2.2.2 TCC2 Card-Level Indicators 2.2.3 Network-Level Indicators 2.3 TCC2P Card 2-8 Chapter2 Common Control Car ds 2.3.1 TCC2P Functionality Figure 2-2 shows the faceplate and block diagram for the TCC2P. Figure2-2 TCC2P Faceplate and Block Diagram 2.3.1 TCC2P Functionality 2.3.2 TCC2P Card-Level Indicators 2.3.3 Network-Level Indicators 2.4 XC10G Card 2-11 Figure 2-3 shows the XC10G card faceplate and block diagram. Figure2-4 XC10G Card Cross-Connect Matrix Figure2-3 XC10G Card Faceplate and Block Diagram Figure 2-4 shows the XC10G card cross-connect matrix. 2.5 XC-VXL-10G Card 2-13 Figure 2-5 shows the XC-VXL-10G faceplate and block diagram. Figure2-6 XC-VXL-10G Cross-Connect Matrix Figure 2-5 XC-VXL-10G Faceplate and Block Diagram Figure 2-6 shows the XC-VXL-10G cross-connect matrix. 2.6 XC-VXL-2.5G Card 2-15 Figure 2-7 shows the XC-VXL-2.5G card faceplate and block diagram. Figure2-8 XC-VXL-2.5G Cross-Connect Matrix Figure2-7 XC-VXL-2.5G Faceplate and Block Diagram Figure 2-8 shows the XC-VXL-2.5G cross-connect matrix. 2.7 AIC-I Card 2.7.1 AIC-I Card-Level Indicators 2.7.2 External Alarms and Controls 2.7.3 Orderwire 2.7.4 Power Monitoring 2.7.5 User Data Channel 2.7.6 Data Communications Channel Page Electrical Cards 3.1 Electrical Card Overview 3.1.1 Card Summary Page 3.1.2 Card Compatibility 3.2 E1-N-14 Card 3.2.1 E1-N-14 Card Functionality 3.2.2 E1-N-14 Card-Level Indicators 3.2.3 E1-N-14 Port-Level Indicators 3.3 E1-42 Card 3.3.1 E1-42 Card Functionality 3.3.2 E1-42 Card-Level Indicators 3.3.3 E1-42 Port-Level Indicators 3.4 E3-12 Card 3.4.1 E3-12 Card Functionality 3.4.2 E3-12 Card-Level Indicators 3.4.3 E3-12 Port-Level Indicators 3.5 DS3i-N-12 Card 3.5.1 DS3i-N-12 Card Functionality 3.5.2 DS3i-N-12 Card-Level Indicators 3.5.3 DS3i-N-12 Port-Level Indicators 3.6 STM1E-12 Card 3.6.1 STM 1E-12 Card Functionality 3.6.2 STM1E-12 Card-Level Indicators 3.6.3 STM1E-12 Port-Level Indicators 3.7 BLANK Card 3.8 FMEC-E1 Card 3-16 3.9 FMEC-DS1/E1 Card any Australian telecommunications network without the written consent of the network manager. 3.9.1 FMEC-DS1/E1 Card Connector Pinout 3.10 FMEC E1-120NP Card 3.10.1 FMEC E1-120NP Connector Pinout Page 3.11 FMEC E1-120PROA Card 3.11.1 FMEC E1-120PROA Connector Pinout Page 3.12 FMEC E1-120PROB Card 3.12.1 FMEC E1-120PROB Connector Pinout Page 3.13 E1-75/120 Impedance Conversion Panel 3-27 Figure 3-13 shows the E1-75/120 with optional rackmount brackets installed. Figure 3-14 shows a block diagram of the impedance conversion panel. 3.13.1 E1-75/120 Impedance Conversion Panel Functionality 3.14 FMEC-E3/DS3 Card 3.15 FMEC STM1E 1:1 Card 3.16 FMEC-BLANK Card 3.17 MIC-A/P FMEC 3.17.1 MIC-A/P Connector Pinouts Page 3.18 MIC-C/T/P FMEC Page Optical Cards 4.1 Optical Card Overview 4.1.1 Card Summary 4.1.2 Card Compatibility 4.2 OC3 IR 4/STM1 SH 1310 Card 4-5 Chapter4 Optical Cards 4.2 OC3 IR 4/STM1 SH 1310 Card Figure 4-1 shows the OC3 IR 4/STM1 SH 1310 faceplate. Figure4-1 OC3 IR 4/STM1 SH 1310 Faceplate 4.2.1 OC3 IR 4/STM1 SH 1310 Functionality 4.2.2 OC3 IR 4/STM1 SH 1310 Card-Level Indicators 4.2.3 OC3 IR 4/STM1 SH 1310 Port-Level Indicators 4.3 OC3 IR/STM1 SH 1310-8 Card 4-8 Figure4-3 OC3 IR/STM1 SH 1310-8 Faceplate Page 4.3.1 OC3 IR/STM1 SH 1310-8 Card-Level Indicators 4.3.2 OC3 IR/STM1 SH 1310-8 Port-Level Indicators 4-11 4.4 OC12 IR/STM4 SH 1310 Card Figure4-5 OC12 IR/STM4 SH 1310 Faceplate and Block Diagram 4.4.1 OC12 IR/STM4 SH 1310 Card-Level Indicators 4.4.2 OC12 IR/STM4 SH 1310 Port-Level Indicators 4.5 OC12 LR/STM4 LH 1310 Card 4-13 Figure4-6 OC12 LR/STM4 LH 1310 Faceplate 4.5.1 OC12 LR/STM4 LH 1310 Card-Level Indicators 4.5.2 OC12 LR/STM4 LH 1310 Port-Level Indicators 4.6 OC12 LR/STM4 LH 1550 Card 4-16 Figure 4-8 shows the OC12 LR/STM4 LH 1550 faceplate and a block diagram of the card. Figure4-8 OC12 LR/STM4 LH 1550 Faceplate and Block Diagram 4.6.1 OC12 LR/STM4 LH 1550 Card Functionality 4.6.2 OC12 LR/STM4 LH 1550 Card-Level Indicators 4.6.3 OC12 LR/STM4 LH 1550 Port-Level Indicators 4.7 OC12 IR/STM4 SH 1310-4 Card 4-18 Chapter4 Optical Cards 4.7 OC12 IR/STM4 SH 1310-4 Card Figure4-9 OC12 IR/STM4 SH 1310-4 Faceplate 4.7.1 OC12 IR/STM4 SH 1310-4 Card Functionality 4.7.2 OC12 IR/STM4 SH 1310-4 Card-Level Indicators 4.7.3 OC12 IR/STM4 SH 1310-4 Port-Level Indicators 4.8 OC48 IR/STM16 SH AS 1310 Card 4-21 Figure4-11 OC48 IR/STM16 SH AS 1310 Faceplate 4.8.1 OC48 IR/STM16 SH AS 1310 Card Functionality 4.8.2 OC48 IR/STM16 SH AS 1310 Card-Level Indicators 4.8.3 OC48 IR/STM16 SH AS 1310 Port-Level Indicators 4.9 OC48 LR/STM16 LH AS 1550 Card 4-24 Figure4-13 OC48 LR/STM16 LH AS 1550 Faceplate 4.9.1 OC48 LR/STM16 LH AS 1550 Card Functionality 4.9.2 OC48 LR/STM16 LH AS 1550 Card-Level Indicators 4.9.3 OC48 LR/STM16 LH AS 1550 Port-Level Indicators 4.10 OC48 ELR/STM16 EH 100 GHz Cards 4-27 Figure4-15 OC48 ELR/STM16 EH 100 GHz Faceplate 4.10.1 OC48 ELR/STM16 EH 100 GHz Card Functionality 4.10.2 OC48 ELR/STM16 EH 100 GHz Card-Level Indicators 4.10.3 OC48 ELR/STM16 EH 100 GHz Port-Level Indicators 4.11 OC192 SR/STM64 IO 1310 Card 4-30 Figure4-17 OC192 SR/STM64 IO 1310 Faceplate 4.11.1 OC192 SR/STM64 IO 1310 Card Functionality 4.11.2 OC192 SR/STM64 IO 1310 Card-Level Indicators 4.11.3 OC192 SR/STM64 IO 1310 Port-Level Indicators 4.12 OC192 IR/STM64 SH 1550 Card 4-33 Figure 4-19 shows the OC192 IR/STM64 SH 1550 faceplate. Figure4-19 OC192 IR/STM64 SH 1550 Faceplate 4.12.1 OC192 IR/STM64 SH 1550 Card Functionality 4.12.2 OC192 IR/STM64 SH 1550 Card-Level Indicators 4.12.3 OC192 IR/STM64 SH 1550 Port-Level Indicators 4.13 OC192 LR/STM64 LH 1550 Card 4-36 Figure4-21 OC192 LR/STM64 LH 1550 Faceplate and Block Diagram ! 4.13.1 OC192 LR/STM64 LH 1550 Card Functionality ! ! 4.13.2 OC192 LR/STM64 LH 1550 Card-Level Indicators 4.13.3 OC192 LR/STM64 LH 1550 Port-Level Indicators 4.14 OC192 LR/STM64 LH ITU 15xx.xx Card RX 4.14.1 OC192 LR/STM64 LH ITU 15xx.xx Card Functionality 4.14.2 OC192 LR/STM64 LH ITU 15xx.xx Card-Level Indicators 4.14.3 OC192 LR/STM64 LH ITU 15xx.xx Port-Level Indicators Page Ethernet Cards 5.1 Ethernet Card Overview 5.1.1 Cards Summary 5.1.2 Card Compatibility 5.2 E100T-G Card Page 5.2.1 E100T-G Slot Compatibility 5.2.2 E100T-G Card-Level Indicators 5.2.3 E100T-G Port-Level Indicators 5.3 E1000-2-G Card Page 5.3.1 E1000-2-G Compatibility 5.3.2 E1000-2-G Card-Level Indicators 5.3.3 E1000-2-G Port-Level Indicators 5-7 Chapter5 Ethernet Cards 5.4 G1000-4 Card 5.4 G1000-4 Card Figure 5-3 G1000-4 Faceplate and Block Diagram 5.4.1 G1000-4 Card-Level Indicators 5.4.2 G1000-4 Port-Level Indicators 5.4.3 G1000-4 Compatibility 5.5 G1K-4 Card 5-9 Chapter5 Ethernet Cards 5.5.1 G1K-4 Compatibility Figure 5-4 shows the card faceplate and the block diagram of the card. Figure5-4 G1K-4 Faceplate and Block Diagram 5.5.1 G1K-4 Compatibility 5.5.2 G1K-4 Card-Level Indicators 5.5.3 G1K-4 Port-Level Indicators 5.6 ML100T-12 Card 5.6.1 ML100T-12 Card-Level Indicators 5.6.2 ML100T-12 Port-Level Indicators 5.6.3 ML100T-12 Slot Compatibility 5.7 ML1000-2 Card 5.7.1 ML1000-2 Card-Level Indicators 5.7.2 ML1000-2 Port-Level Indicators 5.7.3 ML1000-2 Slot Compatibility 5.8 GBICs and SFPs 5.8.1 Compatibility by Card 5.8.2 GBIC Description 5.8.2.1 DWDM and CWDM GBICs 5.8.2.1.1 Placement of CWDM or DWDM GBICs 5.8.2.1.2 Example of CWDM or DWDM GBIC Application 5.8.3 SFP Description Page Page Storage Access Networking Cards 6.1 FC_MR-4 Card Overview 6-2 Figure 6-1 shows the FC_MR-4 faceplate and block diagram. Table 6 -1 describes the two card-level LEDs on the FC_MR-4 card. 6.1.1 FC_MR-4 Card-Level Indicators B A C K P L A N E Card-Level Indicators Description card if the red FAIL LED persists. traffic. 6.2 FC_MR-4 Card Modes 6.2.1 Line-Rate Card Mode 6.2.2 Enhanced Card Mode 6.2.2.1 Mapping 6.2.2.2 SW-LCAS 6.2.3 Distance Extension (Enhanced Mode Only) 6.2.4 Interoperability Features (Enhanced Mode Only) 6.3 FC_MR-4 Card Application Page Card Protection 7.1 Electrical Card Protection 7.1.1 1:1 Protection 7.1.2 1:N Protection 7.1.2.1 Revertive Switching 7.1.2.2 1:N Protection Guidelines 7.2 STM-N Card Protection 7.3 Unprotected Cards 7.4 External Switching Commands Page Cisco Transport Controller Operation 8.1 CTC Software Delivery Methods 8.1.1 CTC Software Installed on the TCC2/TCC2P Ca rd Page 8.1.2 CTC Software Installed on the PC or UNIX Workstation 8.2 CTC Installation Overview 8.3 PC and UNIX Workstation Requirements Page 8.4 ONS 15454 SDH Connection 8.5 CTC Window 8.5.1 Node View 8.5.1.1 CTC Card Colors Page Page 8.5.1.2 Node View Card Shortcuts 8.5.1.3 Node View Tabs 8.5.2 Network View Page 8.5.3 Card View Page 8.6 TCC2/TCC2P Card Reset 8.7 TCC2/TCC2P Card Database 8.8 Software Revert Page Security and Timing 9.1 Users and Security 9.1.1 Security Requirem ents Page Page Page 9.1.2 Security Policies 9.1.2.1 Idle User Timeout 9.1.2.2 User Password, Login, and Access Policies 9.1.2.3 Audit Trail 9.2 Node Timing 9.2.1 Network Timing Example 9.2.2 Synchronization Status Messaging Page Page Circuits and Tunnels 10.1 Overview 10.2 Circuit Properties Page 10.2.1 Circuit Status 10.2.2 Circuit States Page 10.2.3 Circuit Protection Types 10.2.4 Circuit Information in the Edit Circuit Window Page 10.3 Cross-Connect Card Bandwidth 10.4 DCC Tunnels 10.4.1 Traditional DCC Tunnels 10.4.2 IP-Encapsulated Tunnels 10.5 Multiple Destinations for Unidirectional Circuits 10.6 Monitor Circuits 10.7 SNCP Circuits 10.7.1 Open-Ended SNCP Circuits 10.7.2 Go-and-Return SNCP Routing 10.8 MS-SPRing Protection Channel Access Circuits 10.9 Path Trace 10.10 Path Signal Label, C2 Byte 10.11 Automatic Circuit Routing 10.11.1 Bandwidth Allocation and Routing 10.11.2 Secondary Sources and Destinations 10.12 Manual Circuit Routing 10-19 Figure10-8 Mixing 1+1 or MS-SPRing Protected Links with an SNCP Choose the links of multicard EtherSwitch circuits in a shared packet ring to route from source to Figure10-9 Ethernet Shared Packet Ring Routing Multicard EtherSwitch circuits can have virtual SNCP segments if the source or destination is not Page Page 10.13 Constraint-Based Circuit Routing 10.14 Virtual Concatenated Circuits 10.14.1 VCAT Member Routing 10.14.2 Software-Link Capacity Adjustment 10.14.3 VCAT Circuit Size 10.15 Merge Circuits 10.16 Reconfigure Circuits Page SDH Topologies and Upgrades 11.1 SDH Rings and TCC2/TCC2P Cards 11.2 Multiplex Section-Shared Protection Rings 11.2.1 Two-Fiber MS-SPRings Page 11-4 Figure 11-2 shows a sample traffic pattern on a four-node, two-fiber MS-SPRing. Figure11-2 Four-Node, Two-Fiber MS-SPRing Traffic Pattern Page 11.2.2 Four-Fiber MS-SPRings Page 11.2.3 MS-SPRing Bandwidth Page 11.2.4 MS-SPRing Application Sample 11-11 Figure 11-9 shows the shelf assembly layout for Node 0, which has one free slot. 11.2.5 MS-SPRing Fiber Connections 11.2.6 Two-Fiber MS-SPRing to Four-Fiber MS-SPRing Conversion 11.3 Subnetwork Connection Protection Page Page Page 11-17 11.4 Dual Ring Interconnect 11.4.1 MS-SPRing DRI Page 11-20 Page 11.4.2 SNCP Dual Ring Interconnect 11-23 11-24 11.4.3 SNCP/MS-SPRing DRI Handoff Configurations 11.5 Subtending Rings Page 11.6 Linear ADM Configurations 11.7 Extended SNCP Mesh Networks 11-30 11.8 Four Node Configurations 11.9 STM-N Speed Upgrades 11.9.1 Span Upgrade Wizard 11.9.2 Manual Span Upgrades CTC Network Connectivity 12.1 IP Networking Overview 12.2 IP Addressing Scenarios 12.2.1 Scenario 1: CTC and ONS 15454 SDH Nodes on Same Subnet 12.2.2 Scenario 2: CTC and ONS 15454 SDH Nodes Connected to a Router 12.2.3 Scenario 3: Using Proxy ARP to Enable an ONS 15454 SDH Gateway Page 12.2.4 Scenario 4: Default Gateway on CTC Computer 12.2.5 Scenario 5: Using Static Routes to Connect to LANs 12-8 The destination and subnet mask entries control access to the ONS 1 5454 SDH nodes: as the destination with a subnet mask of 255.255.255.255. 192.168.1.0) and a subnet mask of 255.255.255.0. 12-9 12.2.6 Scenario 6: Using OSPF Page 12.2.7 Scenario 7: Provisioning the ONS 15454 SDH Proxy Server Page Page Page 12-15 Page 12.2.8 Scenario 8: Dual GNEs on a Subnet 12-18 12.2.9 Scenario 9: IP Addressing with Secure Mode Enabled 12-20 12.3 Provisionable Patchcords Page 12.4 Routing Table Page 12.5 External Firewalls Page 12.6 Open GNE 12-28 12-29 Page Alarm Monitoring and Management 13.1 Overview 13.2 Documenting Existing Provisioning 13.3 Viewing Alarm Counts on the LCD for a Node, Slot, or Port 13.4 Viewing Alarms 8/18/03 04.06-002L-10 24C Page 13.4.1 Viewing Alarms With Each Nodes Time Zone 13.4.2 Controlling Alarm Display 13.4.3 Filtering Alarms 13.4.4 Viewing Alarm-Affected Circuits 13.4.5 Conditions Tab 13.4.6 Controlling the Conditions Display 13.4.6.1 Retrieving and Displaying Conditions 13.4.6.2 Conditions Column Descriptions 13.4.6.3 Filtering Conditions 13.4.7 Viewing History 13.4.7.1 History Column Descriptions 13.4.7.2 Retrieving and Displaying Alarm and Condition History 13.5 Alarm Severities 13.6 Alarm Profiles 13.6.1 Creating and Modifying Alarm Profiles 13.6.2 Alarm Profile Buttons 13.6.3 Alarm Profile Editing 13.6.4 Alarm Severity Options 13.6.5 Row Display Options 13.6.6 Applying Alarm Profiles 13.7 Suppressing Alarms 13.8 Provisioning External Alarms and Controls 13.8.1 External Alarm Input 13.8.2 External Control Output 13.9 Audit Trail 13.9.1 Audit Trail Log Entries 13.9.2 Audit Trail Capacities Page Page CHAPTE R Ethernet Operation 14.1 G-Series Application 14.1.1 G1K-4 and G1000-4 Comparison 14.1.2 G-Series Example 14.1.3 IEEE 802.3z Flow Control and Frame Buffering 14.1.4 Ethernet Link Integrity Support 14.1.5 Gigabit EtherChannel/IEEE 802.3ad Link Aggregation 14.2 G-Series Gigabit Ethernet Transponder Mode 14-6 Server/switch/router Conventional Gigabit Ethernet signals DWDM filter Conventional LX or ZX GBICs CWDM or DWDM GBICs Gigabit Ethernet over CWDM or DWDM GBICs' TX wavelengths 14.2.1 Two-Port Bidirectional Transponder 14.2.2 One-Port Bidirectional Transponder 14.2.3 Two-Port Unidirectional Transponder 14.2.4 G-Series Transponder Mode Characteristics 14.3 E-Series Application 14.3.1 E-Series Modes 14.3.1.1 E-Series Multicard EtherSwitch Group 14.3.1.2 E-Series Single-Card EtherSwitch 14.3.1.3 Port-Mapped (Linear Mapper) 14.3.2 E-Series IEEE 802.3z Flow Control 14.3.3 E-Series VLAN Support 14.3.4 E-Series Q-Tagging (IEEE 802.1Q) Data Flow 14.3.5 E-Series Priority Queuing (IEEE 802.1Q) Data Flow 14.3.6 E-Series Spanning Tree (IEEE 802.1D) 14.3.6.1 E-Series Multi-Instance Spanning Tree and VLANs 14.3.6.2 Spanning Tree on a Circuit-by-Circuit Basis 14.3.6.3 E-Series Spanning Tree Parameters 14.3.6.4 E-Series Spanning Tree Configuration 14.4 G-Series Circuit Configurations 14.4.1 G-Series Point-to-Point Ethernet Circuits 14.4.2 G-Series Manual Cross-Connects 14.5 E-Series Circuit Configurations 14.5.1 Port-Mapped Mode and Single-card EtherSwitch Circuit Scenarios 14-21 14.5.2 E-Series Point-to-Point Ethernet Circuits 14.5.3 E-Series Shared Packet Ring Ethernet Circuits 14.5.4 E-Series Hub-and-Spoke Ethernet Circuit Provisioning 14.5.5 E-Series Ethernet Manual Cross-Connects 14.6 Remote Monitoring Specification Alarm Thresholds Page Page Page A Hardware Specifications A.1 Shelf Specifications A.1.1 Bandwidth A.1.2 Configurations A.1.3 Cisco Transport Controller A.1.4 External LAN Interface A.1.5 Alarm Interface A.1.6 Database Storage A.1.7 Timing Interface A.2 SFP Specifications A.3 General Card Specifications A.3.1 Power Consumption Page A.3.2 Temperature Ranges Page A.4 Common Control Card Specifications A.4.1 TCC2 Card Specifications A.4.2 TCC2P Card Specifications A.4.3 XC10G Card Specifications A.4.4 XC-VXL-10G Card Specifications A.4.5 XC-VXL-2.5G Card Specifications A.4.6 AIC-I Specifications Page A.5 Electrical Card and FMEC Specifications A.5.1 E1-N-14 Card Specifications A.5.2 E1-42 Card Specifications A.5.3 E3-12 Card Specifications A.5.4 DS3i-N-12 Card Specifications A.5.5 STM1E-12 Card Specifications A.5.6 BLANK Card A.5.7 FMEC-E1 Specifications A.5.8 FMEC-DS1/E1 Card Specifications A.5.9 FMEC E1-120NP Card Specifications A.5.10 FMEC E1-120PROA Card Specifications A.5.11 FMEC E1-120PROB Card Specifications A.5.12 E1-75/120 Impedance Conversion Panel Specifications A.5.13 FMEC-E3/DS3 Card Specifications Page A.5.14 FMEC STM1E 1:1 Card Specifications A.5.15 FMEC-BLANK Card Specifications A.5.16 MIC-A/P Card Specifications A.5.17 MIC-C/T/P Card Specifications A.6 Optical Card Specifications A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications A.6.2 OC3 IR/STM1 SH 1310-8 Card Specifications A.6.3 OC12 IR/STM4 SH 1310 Card Specifications A.6.4 OC12 LR/STM4 LH 1310 Card Specifications A.6.5 OC12 LR/STM4 LH 1550 Card Specifications A.6.6 OC12 IR/STM4 SH 1310-4 Card Specifications A.6.7 OC48 IR/STM16 SH AS 1310 Card Specifications A.6.8 OC48 LR/STM16 LH AS 1550 Card Specifications A.6.9 OC48 ELR/STM16 EH 100 GHz Card Specifications A.6.10 OC192 SR/STM64 IO 1310 Card Specifications A.6.11 OC192 IR/STM64 SH 1550 Card Specifications A.6.12 OC192 LR/STM64 LH 1550 Card Specifications Page A.6.13 OC192 LR/STM64 LH ITU 15xx.xx Card Specifications A.7 Ethernet Card Specifications A.7.1 E100T-G Card Specifications A.7.2 E1000-2-G Card Specifications A.7.3 G1000-4 Card Specifications A.7.4 G1K-4 Card Specifications A.7.5 ML100T-12 Card Specifications A.7.6 ML1000-2 Card Specifications A.8 Storage Access Networking Card Specifications A.8.1 FC_MR-4 Card Specifications B Administrative and Service States B.1 Service States B.2 Administrative States B.3 Service State Transitions B.3.1 Card Service State Transitions Page B.3.2 Port and Cross-Connect Service State Transitions Page C Network Element Defaults C.1 Network Element Defaults Description C.2 Card Default Settings Page C.2.1 E1 Card Default Settings C.2.2 E1-42 Card Default Settings Page C.2.3 E3 Card Default Settings Page C.2.4 FC_MR-4 Card Default Settings C.2.5 DS3I Card Default Settings Page Page C.2.6 Data Card Default Settings C.2.7 STM1 Card Default Settings Page C.2.8 STM1-8 Card Default Settings Page Page C.2.9 STM1E-12 Card Default Settings Page C.2.10 STM4 Card Default Settings Page C.2.11 STM4-4 Card Default Settings Page C.2.12 STM16 Card Default Settings Page Page C.2.13 STM64 Card Default Settings Page C.2.14 MXP_2.5G_10G Card Default Settings Page Page Page C.2.15 MXP_2.5G_10E Card Default Settings Page Page Page C.2.16 MXP_MR_2.5G Card Default Settings Page Page C.2.17 MXPP_MR_2.5G Card Default Settings Page Page C.2.18 TXP_MR_10E Card Default Settings Page Page Page C.2.19 TXP_MR_10G Card Default Settings Page Page Page Page C.2.20 TXP_MR_2.5G Card Default Settings Page Page Page Page Page C.2.21 TXPP_MR_10G Card Default Settings Page Page Page Page Page Page C.2.22 OSCM Card Default Settings C.2.23 OSC-CSM Card Default Settings C.3 Node Default Settings Page Page C.4 CTC Default Settings Page Page INDEX Numerics A B C D E Page F G H I J K L M N O Page P Q R S T U V W X