Cisco Systems 15454 SDH A.5.3 E3-12 Card Specifications

A-14
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
AppendixA Hardware Specifications
A.5.3 E3-12 C ard Specifications
– Depth with backplane connector: 235 mm (9.250 in.)
– Weight not including clam shell: 0.8 kg (1.9 lb)
A.5.3 E3-12 Card Specifications
The E3-12 card has the following specifications:
•E3-12 input
– Bit rate: 34.368 Mbps +/–20 ppm
– Line code: HDB-3
– Termination: Unbalanced coaxial cable
– Input impedance: 75 ohms +/–5%
– Cable loss: Up to 12 dB at 17184 kHz (for cable length, see the specification of the cable that
you are using)
– AIS: ITU-T G.704 compliant
•E3-12 output
– Bit rate: 34.368 Mbps +/– 20 ppm
– Line code: HDB-3
– Termination: Unbalanced coaxial cable
– Output impedance: 75 ohms +/–5%
– AIS: ITU-T G.704 compliant
– Power level: –1.8 to +5.7 dBm
– Pulse shape: ITU-T G.703, Figure 17
– Pulse amplitude: 0.36 to 0.85 V peak-to-peak
– Loopback modes: terminal and facility
•E3-12 electrical interface
– Connectors: 1.0/2.3 miniature coax connectors in the FMEC-E3/DS3 card
•Environmental
– Overvoltage protection: As in ITU-T G.703 Annex B
– Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95%, noncondensing
– Power consumption: 38.20 W, 0.80 A at –48 V, 130.4 BTU/hr
•Dimensions
– Height: 321.3 mm (12.650 in.)
– Width: 18.2 mm (0.716 in.)
– Depth: 228.6 mm (9.000 in.)
– Depth with backplane connector: 235 mm (9.250 in.)
– Weight not including clam shell: 0.7 kg (1.7 lb)