xxx
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2009
About this Guide
Document Objectives
This manual provides reference information for the Cisco ONS 15 454 SDH.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware
and cabling, telecommunications hardware and cabling, e lectronic circuitry and wiring practices, and
preferably have experience as a telecommunications technicia n.
Document Organization
Table 1 lists the chapter titles and provides a summary for each chapter.
Table1 Cisco ONS 15454 SDH Reference Manual Chapters
Title Summary
Chapter 1, “Shelf and FMEC Hardware” Includes descriptions of the rack, ferrites, power
and ground, fan-tray assembly, air filter, card slots,
cable, cable connectors, and cable routing.
Chapter2, “Common Control Cards” Includes descriptions of the TCC2P, XC10G,
XC-VXL, and AIC-I cards.
Chapter3 , “Electrical Cards” Includes descriptions of E1-N-14, E1-42, E3-12,
DS3i-N-12, STM1E-12, FMEC cards, MIC cards,
card temperature ranges, and compatibility.
Chapter 4, “Optical Cards” Includes descriptions of the STM1-4, STM1-8,
STM-4, STM4-4, STM-16, STM-64, TXP_MR,
TXPP_MR, and MXP cards, as well as card
temperature ranges and card compatibility.
Chapter 5, “Ethernet Cards” Includes descriptions of the E100T-G, E1000-2-G,
G1000-4, G1K-4, ML100T-12, and ML1000-2
cards and gigabit interface converters.
Chapter6, “Storage Access Networking Cards” Includes the FC_MR-4 card description and
application.
Chapter 7, “Card Protection” Includes electrical, optica l, and transponder and
muxponder card protection methods, as well as
external switching commands.
Chapter 8, “Cisco Transport Controller
Operation”
Includes information about CTC delivery,
installation, computer requirements, connection,
the CTC window, and database reset and revert.
Chapter 9, “Security and Timing” Includes user set up and security, and
node/network timing.