Cisco Systems 15454 SDH A.5.11 FMEC E1-120PROB Card Specifications

A-20
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
AppendixA Hardware Specifications
A.5.11 FMEC E1-120PROB Car d Specifications
– Pulse amplitude: ITU-T G.703, Figure 15 and Table 7
•FMEC E1-120PROA electrical interface
– Connectors: Molex 96-pin LFH connectors (21 ports per co nnector)
•Environmental
– Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95%, noncondensing
– Power consumption: 0.1 W (provided by the E1-42 card), 0.34 BTU/hr
•Dimensions
– Height: 182 mm (7.165 in.)
– Width: 32 mm (1.25 in.)
– Depth: 92 mm (3.62 in.)
– Depth with backplane connector: 98 mm (3.87 in.)
– Weight not including clam shell: 0.3 kg (0.7 lb)
A.5.11 FMEC E1-120PROB Card Specifications
The FMEC E1-120PROB card has the following specifications:
•FMEC E1-120PROB input
– Bit rate: 2.048 Mbps +/–50 ppm
– Line code: HDB-3
– Termination: Balanced twisted-pair cable
– Input impedance: 120 ohms +/–5%
– Cable loss: Up to 6 dB at 1024 kHz
•FMEC E1-120PROB output
– Bit rate: 2.048 Mbps +/–50 ppm
�� Line code: HDB-3
– Termination: Balanced twisted-pair cable
– Input impedance: 120 ohms +/–5%
– Pulse shape: ITU-T G.703, Figure 15 and Table 7
– Pulse amplitude: ITU-T G.703, Figure 15 and Table 7
•FMEC E1-120PROB electrical interface
– Connectors: Molex 96-pin LFH connectors (21 ports per co nnector)
•Environmental
– Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95%, noncondensing
– Power consumption: 0.1 W (provided by the E1-42 card), 0.34 BTU/hr
•Dimensions
– Height: 182 mm (7.165 in.)