Cisco Systems 30 VIP

Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1)

Cause Code Descriptions

22 Number changed

26 Non-selected user clearing

27 Destination out of order

28 Invalid number format (address incomplete)

29 Facility rejected

30 Response to STATUS ENQUIRY

31 Normal, unspecified

34 No circuit/channel available

38 Network out of order

39 Permanent frame mode connection out of service

40 Permanent frame mode connection operational

41 Temporary failure

42 Switching equipment congestion

43 Access information discarded

44 Requested circuit/channel not available

46 Precedence call blocked

47 Resource unavailable, unspecified

49 Quality of Service not available

50 Requested facility not subscribed

53 Service operation violated

54 Incoming calls barred

55 Incoming calls barred within CUG (Closed User Group)

57 Bearer capability not authorized

58 Bearer capability not presently available

62 Inconsistency in designated outgoing access information and subscriber class

63 Service or option not available, unspecified

65 Bearer capability not implemented

66 Channel type not implemented

69 Requested facility not implemented

70 Only restricted digital information bearer capability is available (national use)

79 Service or option not implemented, unspecified

81 Invalid call reference value

82 Identified channel does not exist

83 A suspended call exists, but this call identity does not

84 Call identity in use

85 No call suspended

86 Call having the requested call identity has been cleared

87 User not member of CUG (Closed User Group)

88 Incompatible destination

90 Destination number missing and DC not subscribed

91 Invalid transit network selection (national use)

95 Invalid message, unspecified

96 Mandatory information element is missing

97 Message type non-existent or not implemented

98 Message is not compatible with the call state, or the message type is non-existent or

not implemented

99 An information element or parameter does not exist or is not implemented

100 Invalid information element contents

101 The message is not compatible with the call state

102 The call was terminated when a timer expired and a recovery routine was executed to

recover from the error

103 Parameter non-existent or not implemented - passed on (national use)

110 Message with unrecognized parameter discarded