Cisco Systems 4300E, 4500E manual Power LED

Chapter 1 Overview

IP Camera Physical Details

Figure 1-2and the table that follows describe the items on the rear of the IP camera.

Figure 1-2 Rear of IP Camera

1	Power LED	Lights bright when the IP camera is powering up. Lights dim when
		the camera is IP operating
2	Analog Audio/Video Port	Allows the connection of an optional Y cable or mini cable with
		BNC connector. You can connect an optional external speaker or
		microphone to the Y cable, or an optional video monitor to the mini
		cable with BNC connector. Both cables are included in the optional
		audio/video cables accessory kit can be purchased from Cisco
		(Cisco part number CIVS-IPCA-1021=).
3	PoE LED	Indicates information about PoE as follows:
		• Lit green—PoE connection is detected
		• Off—PoE connection is not detected
4	LAN port	Accepts a standard LAN cable to connect the IP camera to a
		10/100BaseT router or switch.
5	Network Activity LED	Indicates information about the network connections as follows:
		• Lit amber—LAN connection is detected
		• Off—LAN connection is not detected
		• Blinking—Data is being transmitted or received via the LAN
		connection

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

1-4 OL-25230-02