Cisco Systems 4300E Factory Default Area, Restore button, section on page, Reset button, 3-32

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Table 3-19describes the options in the Maintenance Settings window.

Table 3-19 Maintenance Settings Window Options

Option	Description
Factory Default Area
Restore button	Click the Restore button to reset all IP camera settings to their factory
	default values.
	To confirm the restore procedure, click OK in the confirmation pop-up
	window. Otherwise, click Cancel.
	This action has the same effect as pressing and holding the Reset button on
	the IP camera for at least 15 seconds. After you perform this procedure,
	follow the steps in the “Performing the Initial Setup of the IP Camera”
	section on page 2-5.
Reset button	Click the Reset button to reset all IP camera settings except the static IP
	address, gateway IP address, and log in credentials (user name and
	password) to their factory default values.
	To confirm the restore procedure, click OK in the confirmation pop-up
	window. Otherwise, click Cancel.
Reboot Area
Reboot button	Click the Reboot button to reboot the software on IP camera.
	To confirm the reboot procedure, click OK in the confirmation pop-up
	window. Otherwise, click Cancel.
	This action has the same effect as pressing and immediately releasing the
	Reset button on the IP camera, or powering the IP camera down and then
	powering it up.

Device Configuration Area

Export Configuration from Camera

Click the Export button to save the current IP camera configuration information to a binary file.

When you click this button, the File Download window appears. Use this window to save the configuration file.

You can then load this configuration information to any same-model IP camera in the network. This feature is useful for creating a backup of this configuration and for configuring other IP cameras based on this configuration.

	Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
3-32	OL-25230-02