Cisco Systems 4500E, 4300E Firmware Settings Window, Addressing Window” section on page, 3-33

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Table 3-19	Maintenance Settings Window Options (continued)
Option		Description
Import configuration to		Path and folder where a configuration file is stored. You can click Browse to
camera		find this location. After you enter this information, click Import to load the
		configuration file to the IP camera.
		After you upload a configuration file to the IP camera, the IP camera restarts
		automatically.
		If you upload configuration from another IP camera that is active in your
		network, make sure to configure this IP camera with a name, description, and
		unique IP address (if not obtained through DHCP). To change these options,
		see the “Basic Settings Window” section on page 3-18and the “IP
		Addressing Window” section on page 3-19.
		A configuration file that you upload includes the passwords that are
		configured for the administrator and for users. If you change any passwords
		after saving the configuration file, be aware that uploading the file overwrites
		the new passwords with the saved ones.

Firmware Settings Window

The Firmware Settings window lets you view information about the firmware that is installed on the IP camera and upgrade the firmware.

Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and unzip the file if it is zipped. To download firmware, go to this web page:

http://www.cisco.com/en/US/products/ps6918/Products_Sub_Category_Home.html

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.

To display the Firmware Settings window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Administration, then click Firmware.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-20describes the options in the Firmware Settings window.

Table 3-20 Firmware Settings Window Options

Option

Description

Device Information Area

IP Address	Display only. IP address of the IP camera
MAC Address	Display only. MAC address of the IP camera.
Device Name	Display only. ID of the IP camera, as configured in the Basic Settings
	window. For more information, see the “Basic Settings Window” section on
	page 3-18.

	Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02		3-33