Cisco Systems 4500E, 4300E manual Power input

Chapter 1 Overview

			IP Camera Physical Details
6	Power input	Provides for the connection of an optional 12 V, 1 amp DC power
		adapter or 24 VAC power adapter.
		Caution Use only the Cisco specified power supply adapter.
7	Reset button	Recessed button that reboots the IP camera or resets it to a default
		state. You can use a pin or paper clip to depress it. It can be used
		any time that the IP camera is on and can have various effects, as
		described in the “Resetting the IP Camera” section on page 2-11.
8	GPIO ports	General purpose input/output (GPIO) terminal block that includes
		2 input ports (labeled DI1, DI2), 2 output ports (labeled DO1,
		DO2), a grounding port (labeled GND), and a 5-pin RS-232 port.
9	USB port	Supports up to 8 GB of USB flash storage of video data when the
		camera loses network connectivity.

Figure 1-3and the table that follows describe the item on the side of the IP camera.

Figure 1-3 Side of IP Camera

1

DC auto iris lens connector

Connection for cable from DC auto iris lens

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

OL-25230-02 1-5