Cisco Systems 4500E, 4300E manual 802.1x Settings Area, EAP-TTLS, EAP-PEAP,and EAP-FAST, 3-25

Chapter 3 Configuring and Managing the IP Camera

Network Setup Windows

802.1x Settings Window

The 802.1x Settings window provides options for configuring 802.1x authentication for the IP camera. These settings require that RADIUS be configured on your network to provide the client authentication.

To display the 802.1x Settings window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Network Setup, then click 802.1x (RADIUS).

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-14describes the options in the 802.1x Settings window.

Table 3-14 802.1x Settings Window Options

	Option	Description
	802.1x Settings Area
	Enable 802.1x	Check this check box to enable 802.1x authentication for the IP camera.
	Protocol Type	Choose the protocol for 802.1x authentication. Options are EAP-TLS,
		EAP-TTLS,EAP-PEAP, and EAP-FAST.
		The remaining fields in this window change depending on the protocol type
		that you choose.
	EAP-TLS Configuration Options
	Note These options appear if you select the protocol type EAP-TLS.
	User Name	Enter the user name that the IP camera uses to access the RADIUS server.
	Device (Client)	Path and folder where the device certificate for the IP camera is stored. You
	Certificate	can click Browse to find this location.
		After you enter this information, click Upload to upload the certificate to the
		IP camera.
	Password (for Private	If the private key in the device certificate is password protected, enter the
	Key)	password that is required to unlock the private key.
	Root CA Certificate	Path and folder where the root certificate that is required for 802.1x
		authentication is stored. You can click Browse to find this location.
		After you enter this information, click Upload to upload the certificate to the
		IP camera.
	EAP-TTLS Configuration Options
	Note These options appear if you select the protocol type EAP-TTLS.
	Inner Authentication	Choose an inner authentication method for EAP-TTLS. Options are
		MS-CHAP,MS-CHAP v2, PEAP, and EAP-MDS.
	User Name	Enter the user name that the IP camera uses to access the RADIUS server.
	Password	Enter the password that the IP camera uses to access the RADIUS server.
	Anonymous ID	Optional. Unsigned public identifier to be used instead of a user name for
		logging in to the RADIUS server.
	Validate Server	Check this check box if you want the identity of the RADIUS server to be
	Certificate	validated.
		Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02			3-25