Cisco Systems 4300E, 4500E manual IP Filter Settings Window, EAP-PEAPConfiguration Options, 3-26

Chapter 3 Configuring and Managing the IP Camera

Network Setup Windows

Table 3-14	802.1x Settings Window Options (continued)
Option		Description
Root CA Certificate		Path and folder where the root certificate that is required for 802.1x
		authentication is stored. You can click Browse to find this location.
		After you enter this information, click Upload to upload the certificate to the
		IP camera.
EAP-PEAP Configuration Options
Note These options appear if you select the protocol type EAP-PEAP.
Inner EAP Protocol		Choose an inner authentication method for EAP-PEAP.
User Name		Enter the user name that the IP camera uses to access the RADIUS server.
Password		Enter the password that the IP camera uses to access the RADIUS server.
Anonymous ID		Optional. Anonymous identifier to be used instead of a user name for
		logging in to the RADIUS server.
Validate Server		Check this check box if you want the identity of the RADIUS server to be
Certificate		validated.
Root CA Certificate		Path and folder where the root certificate that is required for 802.1x
		authentication is stored. You can click Browse to find this location.
		After you enter this information, click Upload to upload the certificate to the
		IP camera.
EAP-FAST Configuration Options
Note These options appear if you select the protocol type EAP-FAST.
Inner EAP Protocol		Choose an inner authentication method for EAP-FAST.
User Name		Enter the user name that the IP camera uses to access the RADIUS server.
Password		Enter the password that the IP camera uses to access the RADIUS server.
Anonymous ID		Optional. Anonymous identifier to be used instead of a user name for
		logging in to the RADIUS server.
Allow Automatic PAC		Check this check box if you want to allow authentication servers to establish
Provisioning		a secure connection with the IP camera so that they can provide the IP
		camera with new Protected Access Credentials (PACs).
PAC file		Path and folder where the PAC file is stored. You can click Browse to find
		this location.
		After you enter this information, click Upload to upload the certificate to the
		IP camera.

IP Filter Settings Window

The IP Filter Settings window provides options for controlling access to the IP camera by designating up to 10 IP addresses or address ranges that are allowed or denied access to the IP camera.

To display the IP Filtering window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Network Setup, then click IP Filtering.

	Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
3-26	OL-25230-02