Intel SBCEFCSW, SBFCM manual DecodeErrorsMonitoringEnabled

DecodeErrorsMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[200	]
FallingTrigger	(decimal value, 0-1000)	[0	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
ISLMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[2	]
FallingTrigger	(decimal value, 0-1000)	[0	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
LoginMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[5	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
LogoutMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[5	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
LOSMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[100	]
FallingTrigger	(decimal value, 0-1000)	[5	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]

The following is an example of the Set Config Zoning command.

FCSM: user1> admin start
FCSM (admin) : user1> config edit
FCSM (admin-config) : user1> set config			zoning
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the			ENTER key to accept the current value.
If you wish to terminate this process			before	reaching the end of the list
press 'q' or 'Q' and the ENTER key to			do so.
AutoSave	(True / False)	[True]
Default	(All / None)	[All ]
Finished configuring attributes.
This configuration must be saved (see			config	save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the			config	cancel command.

31