Zoning command, Opens a Zoning Edit session | Intel SBFCM manual

Zoning command

Opens a Zoning Edit session in which to create and manage zone sets and zones. See the “Zone command” on page 61” and the “Zoneset command” on page 64” for information about managing zone and zone sets.

Authority

Admin. The List keyword is available with User authority.

Syntax

zoning

active

cancel

clear

edit

history

limits

list

restore

save

Keywords

active

Displays membership information for the active zone set including member zones and zone members.

cancel

Closes the current Zoning Edit session. Any unsaved changes are lost.

clear

Clears all inactive zone sets from the volatile edit copy of the zoning database. This keyword does not affect the nonvolatile zoning database. However, if you enter the Zoning Clear command followed by the Zoning Save command, the nonvolatile zoning database will be cleared from the switch. The preferred method for clearing the zoning database from the switch is the Reset Zoning command.

edit

Opens a Zoning Edit session.

history

Displays a history of zoning modifications including the following:

•Time of the most recent zone set activation or deactivation and the user who performed it

•Time of the most recent modifications to the zoning database and the user who made them.

•Checksum for the zoning database.

limits

Displays the maximum limits imposed on the zoning database for the number of zone sets, zones, aliases, members per zone, members per alias, and total members.

list

Lists all fabric zoning definitions. This keyword is available with User authority.

restore

Reverts the changes to the zoning database that have been made during the current Zoning Edit session since the last Zoning Save command was entered.

save

Saves changes made during the current Zoning Edit session. The system will inform you that the zone set must be activated to implement any changes. This does not apply if you entered the Zoning Clear command during the Zoning Edit session.

66Intel Blade Server Fibre Channel Switch Module SBCEFCSW / FC Expansion Card SBFCM Guide

Image 80

Intel SBFCM manual Zoning command, Active Cancel Clear Edit History Limits List Restore Save, Opens a Zoning Edit session

Contents

Page Disclaimer Safety and regulatory information Iii General Safety Electrical Safety Handling electrostatic discharge-sensitive devices Regulatory specifications and disclaimers Safety compliance Vii Electromagnetic compatibility EMCElectromagnetic compatibility notice USA Electromagnetic compatibility notices International Japan EMC Compatibility RRL Korea English translation of the previous notice Contents Xii Diagnostic information Symptom-to-FRU indexIntel Server FC Expansion Card Sbfcm Xiii Sbcefcsw / Sbfcm Parts listing Getting help and technical assistance General information Related publicationsPage Intel Blade Server Fibre Channel Switch Module Sbcefcsw Command line interface CLI Logging on to a switch Command syntax CommandsCommand syntax is as follows Command Admin session commands Commands listed by authority levelUser authority commands Admin authority command Admin command AuthoritySyntax Keywords Alias command Remove alias members Rename aliasold aliasnew Config command Examples Date command Admin to change the date user to display the dateFollowing is an example of the Date command Date Fallback Fallback commandFollowing is an example of the Fallback command All Help commandHelp History History commandFollowing is an example of the History command Image command CleanupImage Fetch accountname ipaddress filesource filedestination Portnumber Lip command for external ports onlyLip Accountname Passwd commandPasswd Ps command Following is an example of the Ps commandSyntax Examples Displays current blade server process information Quit command Reset command Parameter Default Switch configuration defaultsPort configuration defaults Threshold configuration defaults Snmp configuration defaults System configuration defaults Set command Switch state DiagnosticsOnline Offline Set Config command Set configSwitch Threshold Zoning Set Config port parameters Set Config switch parameters ISL Set Config threshold parameters Threshold Set Config zoning parameters Following is an example of the Set Config Port command Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Set Log command Level level Set Port command Set Setup command Set setupSnmp configuration settings Snmp System System configuration settings Following is an example of the Set Setup Snmp command Following is an example of the Set Setup System command Show command AlarmShow About Domains DonorFabric Interface Show Port parameters LIPF8F7 Support Post logDisplays the Post log which contains results from the Post Version TopologyUsers Following is an example of the Show Topology command Following is an example of the Show Port command Following is an example of the Show Switch command LIPF8F7 Show Config command Show config Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show Log command Following is an example of the Show Log command Show Perf command Show perfByte Inbyte Byte Following is an example of the Show Perf command Mfg Show Setup commandShow setup Following is an example of the Show Setup System command Shutdown command Shutdown Test command Choose one of the two types of port loopback tests to run Uptime Uptime commandFollowing is an example of the Uptime command User command UserAccounts Add Following is an example of the User Delete command Following is an example of the User List command Whoami Whoami commandFollowing is an example of the Whoami command Zone command Members zone Remove zone membersRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset command Zones zoneset Remove zoneset zonelistRename zonesetold zonesetnew Zoning command Active Cancel Clear Edit History Limits List Restore SaveEdit Opens a Zoning Edit session Following is an example of the Zoning Edit command Following is an example of the Zoning List commandPage Using the SAN Utility SAN Utility user interface Menu bar Faceplate window Toolbar Some menu selections have shortcut keys as shown in TableMenu shortcut keys Toolbar buttons Data window and tabs Fabric treeGraphic window Using the Topology window Working status indicatorFibre Channel switch module and link status Fibre Channel switch module and link status indicators Working with switch modules and links Arranging switch modules in the window Topology data window tabs Using the Faceplate windowSelecting switch modules and links Opening the Faceplate window and pop-up menus Port views and statusWorking with ports Selecting ports Setting up security Managing fabricsFaceplate data window tabs Opening pop-up menus Managing the fabric database Adding a fabricClick Add fabric Removing a fabric Adding a new switch module to a fabric For switch module bayOpening a fabric view file Saving a fabric view file Replacing a failed switch module in a fabric Deleting switch modules and links from the Topology displayDisplaying fabric information Fabric status Topology window switch module and status icons Zoning concepts Zoning a fabricActive Zoneset Data window Zones Zone sets Using the Zoning Config window Restoring default zoningMerging fabrics and zoning Zone merge failure Using the Edit Zoning window Zone merge failure recovery Managing zone sets Following table explains the toolbar buttons and functionsEdit Zoning window toolbar buttons Toolbar button Function Creating a zone set Click Edit / Create Zone SetActivating and deactivating a zone set Copying a zone to a zone set Managing zones Removing a zone setRemoving all zoning definitions Creating a zone in a zone set Adding zone members Renaming a zone or a zone setRemoving a zone member Removing a zone from a zone set Managing aliases Removing a zone from all zone setsChanging zone types Creating an alias Removing an alias from all zones Managing switch modulesDisplaying switch module information Name Server data window Name server data window entries Switch Data window Switch data window entries Link data window Fabric view port graphing application Configured Zonesets Data window Alarm Log Data windowPort Statistics Data window Port Information Data window Faceplate window, click Switch / Configure Alarm Thresholds Managing alarmsConfiguring alarms Paging a switch module Setting the date and timeResetting a switch module Configuring a switch module Switch module administrative states Domain ID and Domain ID Lock Timeout values Timeout valuesNetwork properties Broadcast support IP configuration IP configuration parametersRemote logging 101 Archiving a switch module Managing firmwareLoading firmware Activating the fallback firmware Managing ports Displaying port informationMonitoring port status 103 Port mode descriptions Mode DescriptionPort operational states Port speeds Port graphing and Fabric View application 105SFP module media view Media icon Description Port Statistics Data window entries 107 Configuring ports Port Information Data window entries 109 External Port Properties window Changing port administrative states Click Port / Port Properties Port administrative states Changing port speeds external ports onlyChanging port modes external ports only 111 Configuring translated loop TL modes external ports only Changing buffer-to-buffer credits external ports onlyStream guard Extending port credits Resetting a port Click Port / Reset Port 113 Switch management utility functions LED diagnostics Fatal error LED flash pattern Heartbeat LED patternsNormal all pass LED flash pattern Internal firmware failure LED flash pattern Switch module fault LED flash pattern Switch module OK LEDConfiguration file system error LED flash pattern Logging Error Port testing Port fault LED flash patterns117 Port isolation causes and fixes Click Port / Port Loopback Test Fibre Channel switch module monitoring using SnmpSnmp configuration Restoring Fibre Channel switch module configuration Snmp trap configurationSnmp configuration parameters Snmp trap configuration parameters Configuration backup Configuration restoreRestoring the factory default configuration Factory default configuration settings Using the Fabric View application Reinitializing the configuration file systemRestoring a switch module Settings Value Port mode GL external F internal Arranging and sizing port performance graphs Starting the Fabric View applicationDisplaying port performance graphs Customizing port performance graphs 123 Port mapping Mapping port locations and software numberingPort mapping 125 Features and specificationsTemperature and altitude Expansion Card specifications Type SpecificationHumidity Blade server on 8% to 80% Blade server off 5% to 80% 127 Inventory checklistMajor components of the Sbfcm Expansion Card Expansion Card top 129 Installing the Expansion CardInstallation guidelines Installing the Expansion Card Handling static-sensitive devices Fibre Channel Switch Module Locations 131Page 133 O expansion option trayPage 135 Keyboard/mouse/video select button Using Fast!UTIL Configuration Settings menu optionsHost Adapter Settings Starting Fast!UTIL Selectable Boot Settings Restore Default SettingsNonmodifiable expansion card settings and examples Setting Example Raw Novram data Advanced Adapter SettingsAdvanced Adapter Settings Extended Firmware Settings Extended firmware settings139 RIO options and operation modes Scan Fibre Channel devices Fibre Channel disk utilityLoopback data test ExitFast!UTIL 141 General Fibre Channel configuration diagramGeneral Checkout System configuration problems Hardware problemsSoftware problems Fibre channel problems 143Page Symptom-to-FRU index 145 Switch error messages Error code ActionFast!UTIL utility status codes 5, 6 Message Action Expansion card error messages147 Management module error messages IP@=XXX.XXX.XXX.XXX Switch diagnostic information LED error codesI2C diagnostic register definitions 149 Failures Action Undetermined problemsAlarms Action Problem determination tips 151Page Intel Blade Server Switch Module Sbcefcsw Fibre Channel Switch Module153 Option Intel Blade Server Fibre Channel Expansion Card Sbcfm Expansion Card 155 Using the documentationBefore you call