Manuals / Intel / Home Audio / Stereo Receiver

Intel SBFCM, SBCEFCSW Using Fast!UTIL, Starting Fast!UTIL, Configuration Settings menu options

Models: SBCEFCSW SBFCM

1 170

Download 170 pages 11.82 Kb

Page 150

Using Fast!UTIL

This chapter provides detailed configuration information for advanced users who want to customize the configuration of the Expansion Card. You can configure the expansion card using the Fast!UTIL utility.

Starting Fast!UTIL

Start or restart the blade server. On the blade server control panel, press the keyboard/video/mouse select button.To access Fast!UTIL, press Ctrl+Q during the expansion card BIOS initialization (it might take a few seconds for the Fast!UTIL menu to be displayed). The Expansion Card has dual adapter ports that can be configured separately with Fast!UTIL. After changing the settings that are described in the “Configuration Settings menu options,” Fast!UTIL restarts the blade server to enable the new parameters.

Important: If the configuration settings are incorrect, the Expansion Card might not function properly.

Configuration Settings menu options

✏NOTE

For information about Remote Boot options, contact your

Intel technical-support representative.

Use the options described in this section to configure the Expansion Card. The Configuration Settings menu displays several options that you can use to configure your expansion card.

Select host adapter

Use this option to select, configure, or view either of the two I/O port addresses on the Expansion Card.

Host Adapter Settings

To access this option, select Host Adapter Settings. The default settings and the modifiable settings for the expansion card are listed in Table <$elemparanumonly and are described in this section. The Expansion Card is always point-to-point connected in the blade server with the Fibre Channel switch module.

✏NOTE

The loop reset delay, adapter hard loop ID, and hard loop ID settings are not applicable.

Table 39. Modifiable expansion card default settings

Setting	Options	Default

Host adapter BIOS	Enabled or disabled	Disabled

Frame size	512, 1024, 2048	2048

Loop reset delay	0-60 seconds	5 seconds

Adapter hard loop ID	Enabled or disabled	Enabled

Hard loop ID	0-125	125

Spin up delay	Enabled or disabled	Disabled

136Intel Blade Swerver Switch Module SBCEFCSW / FC Expansion Card SBFCM: HMM and Troubleshooting Guide

Image 150

Intel SBFCM, SBCEFCSW manual Using Fast!UTIL, Starting Fast!UTIL, Configuration Settings menu options, Select host adapter

Contents

Module SBCEFCSW and Fibre Channel Intel Blade Server Fibre Channel SwitchMaintenance Manual and Troubleshooting Guide Expansion Card SBFCM HardwareDisclaimer Safety and regulatory information General Safety Electrical SafetyHandling electrostatic discharge-sensitivedevices Regulatory specifications and disclaimers Safety complianceDanger: DANGER Electromagnetic compatibility EMC Electromagnetic compatibility notice USAJapan EMC Compatibility RRL Korea English translation of the previous notice Contents Zoning command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Using the SAN Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 SAN Utility user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Menu bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Fabric tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Graphic window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Data window and tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Working status indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Using the Topology window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Fibre Channel switch module and link status . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Working with switch modules and links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Topology data window tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Using the Faceplate window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Opening the Faceplate window and pop-upmenus . . . . . . . . . . . . . . . . . . . . . . 76 Port views and status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Working with ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Faceplate data window tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii 6 SBCEFCSW / SBFCM Parts listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General information Related publicationsNotices used in this book This guide provides instructions to Command line interface CLI Logging on to a switchCommand syntax Commandscommand Admin authority command Table 1. Commands listed by authority levelUser authority commands Admin session commandsSyntax Admin commandAuthority KeywordsSyntax Alias commandAuthority Keywordsremove alias members rename alias_old alias_newactivate config Config commandconfig backupFCSM admin-config user1 config cancel FCSM: user1> admin startFCSM admin : user1> config edit FCSM admin user1 admin endSyntax Date commandAuthority KeywordsSyntax Fallback commandAuthority NotesAuthority Help commandcommand SyntaxSyntax History commandAuthority NotesAuthority Image commandcleanup SyntaxSyntax Lip command for external ports onlyAuthority KeywordsSyntax Passwd commandAuthority KeywordsSyntax Ps commandAuthority Examplesreset Quit commandReset command config config_nameDefault Table 2. Switch configuration defaultsTable 3. Port configuration defaults External port 0,15 defaultTable 3. Port configuration defaults continued Table 4. Threshold configuration defaultsTable 5. SNMP configuration defaults Table 6. System configuration defaultsconfig option Set commandalarm clear setup optionPrepares all ports for testing switch stateDiagnostics OnlineTable 7. Set Config port parameters Set Config commandset config AuthorityTable 7. Set Config port parameters continued switchTable 8. Set Config switch parameters Table 8. Set Config switch parameters continued Table 9. Set Config threshold parametersthreshold Default Table 10. Set Config zoning parametersor to RAM volatile Off. The default is On ExamplesFinished configuring attributes DecodeErrorsMonitoringEnabled Syntax Set Log commandAuthority Keywordsrestore level levelSwitch NotesDiagnostics Set Port commandenable alpa AuthorityTable 11. SNMP configuration settings Set Setup commandset setup AuthorityExamples Table 12. System configuration settingsNotes systemTrap1Port config option Show commandalarm Authorityfabric domainsdonor interfaceTable 13. Show Port parameters post log setup optionTable 13. Show Port parameters continued steering domain_idtopology switchExamples usersFCSM: user1> show topology OperationalState Online switch Show Config commandshow config AuthorityMFS_TOV MSEnable True NoClose False ISLMonitoringEnabled Authority Show Log commandsettings SyntaxState = E_A0_GET_DOMAIN_ID Authority Show Perf commanderrors port_number SyntaxExamples FCSM: user1>: show perfAuthority Show Setup commandshow setup SyntaxTrap1Enabled False Trap2Address Trap2Port162 Syntax Shutdown commandAuthority NotesAuthority Test commandcancel Syntaxtest x external Syntax Uptime commandAuthority ExamplesSyntax User commandAuthority Keywordsadmin@OB-session1- in admin mode FCSM admin : user1> user del user3FCSM admin : user1> user list admin@OB-session2 user1@OB-session3Syntax Whoami commandAuthority ExamplesSyntax Zone commandAuthority Keywordsremove zone members Examplesmembers zone rename zone old zone newwwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 Syntax Zoneset commandAuthority Keywordsremove zone_set zone_list NotesExamples rename zone_set_old zone_set_newrestore Zoning commandcancel AuthorityFCSM: user1> admin start ExamplesConfigured Zoning Information Using the SAN Utility SAN Utility user interfaceFigure 1. Topology window Menu bar Figure 2. Faceplate windowFigure 3. Menu bar selection examples Toolbar Table 14. Menu shortcut keysTable 15. Toolbar buttons Data window and tabs Fabric treeGraphic window Figure 4. Fabric treeFibre Channel switch module and link status Using the Topology windowWorking status indicator Figure 5. Topology windowWorking with switch modules and links Arranging switch modules in the windowTopology data window tabs Using the Faceplate windowSelecting switch modules and links Figure 7. Faceplate windowWorking with ports Opening the Faceplate window and pop-upmenusPort views and status Selecting portsFaceplate data window tabs Setting up securityManaging fabrics Opening pop-upmenus5.Click Add fabric Managing the fabric databaseAdding a fabric Removing a fabricSaving a fabric view file Adding a new switch module to a fabricOpening a fabric view file Rediscovering a fabric2.Click Switch / Delete Replacing a failed switch module in a fabric4.Click Switch / Restore Displaying fabric informationSwitch module icon Zoning concepts Zoning a fabricActive Zoneset Data window Figure 9. Active Zonesets windowSoft zoning Access control list zonesZones Virtual private fabric zonesZone sets Zoning configurationDefault visibility Zoning databaseMerging fabrics and zoning Using the Zoning Config windowRestoring default zoning Zone merge failureUsing the Edit Zoning window Zone merge failure recoveryFigure 11. Edit Zoning window Managing zone sets Table 18. Edit Zoning window toolbar buttonsActivating and deactivating a zone set Creating a zone set2.Click Edit / Create Zone Set Copying a zone to a zone setRemoving all zoning definitions Managing zonesRemoving a zone set Creating a zone in a zone setRenaming a zone or a zone set Edit / Add MembersAdding zone members 2.Click Edit / Rename2.Click Edit / Remove Zone from All Sets Managing aliasesRemoving a zone from all zone sets Changing zone typesRemoving an alias from all zones Managing switch modulesDisplaying switch module information Click Edit / Add MembersFigure 12. Faceplate data window Name Server data window•Click View / Refresh Table 19. Name server data window entriesSwitch Data window Table 20. Switch data window entriesLink data window Fabric view port graphing applicationTable 20. Switch data window entries continued Port Statistics Data window Configured Zonesets Data windowAlarm Log Data window Port Information Data windowManaging alarms Configuring alarmsResetting a switch module Paging a switch moduleSetting the date and time Configuring a switch moduleSymbolic name Domain ID and Domain ID LockFigure 15. Switch Properties window Switch module administrative stateBroadcast support Timeout valuesNetwork properties In-bandmanagementTable 23. IP configuration parameters IP configurationRemote logging Figure 16. Network Properties windowLoading firmware Archiving a switch moduleManaging firmware Activating the fallback firmwareMonitoring port status Managing portsDisplaying port information Figure 17. Faceplate Display Data windowDisplaying port operational states Displaying port modesTable 24. Port mode descriptions Table 25. Port operational statesPort graphing and Fabric View application Displaying SFP module media statusTable 27. SFP module media view Port Statistics Data window Table 28. Port Statistics Data window entriesDecode Error Count Name Server Data window Configuring portsPort Information data window Table 29. Port Information Data window entriesFigure 18. External Port Properties window •Port state •Port speed •Port mode •TL modeChanging port administrative states 2.Click Port / Port PropertiesFigure 19. Internal Port Properties window Table 30. Port administrative states Changing port speeds external ports onlyChanging port modes external ports only 2.Click Port / Port Properties2.Click Port / Port Properties I/O stream guardExtending port credits Table 32. Port modes continuedResetting a port 2.Click Port / Reset PortFigure 20. Extended Credits window Switch management utility functions LED diagnosticsNormal all pass LED flash pattern Fatal error LED flash patternHeartbeat LED patterns Internal firmware failure LED flash patternConfiguration file system error LED flash pattern Switch module fault LED flash patternSwitch module OK LED Port logged-inLED flash patternsPort testing Port fault LED flash patternsTable 33. E-portisolation causes and fixes 2.Click Port / Port Loopback Test Fibre Channel switch module monitoring using SNMPSNMP configuration Figure 22. Port Loopback Test windowSNMP trap configuration Table 34. SNMP configuration parametersTable 35. SNMP trap configuration parameters Restoring the factory default configuration Configuration backupConfiguration restore Table 36. Factory default configuration settingsUsing the Fabric View application Reinitializing the configuration file systemRestoring a switch module Arranging and sizing port performance graphs Starting the Fabric View applicationDisplaying port performance graphs Figure 23. Fabric View graphsCustomizing port performance graphs Figure 24. Modify Graph Display windowMapping port locations and software numbering Port mappingTable 37. Port mapping Features and specifications 3 Intel Server FC Expansion Card SBFCMTemperature and altitude •Blade server on: 8% to 80% Table 38. Expansion Card specificationsHumidity •Blade server off: 5% to 80%Inventory checklist Notices and statements used in this bookMajor components of the SBFCM Expansion Card Figure 25. Expansion Card top Installing the Expansion Card Installation guidelinesFigure 26. Expansion Card bottom Installing the Expansion Card Handling static-sensitivedevicesFigure 27. Fibre Channel Switch Module Locations 10.If an IDE hard disk drive is in IDE connector 2, remove the drive and tray save the screws that secure the tray to the system board otherwise, remove the two screws near IDE connector 2 that secure the system board to the chassis 15.Gently press the card into the connectors Figure 28. I/O expansion option trayFigure QLogic Corporation QLA2312 PCI Fibre Channel ROM BIOS VersionFigure 30. keyboard/mouse/video select button Press <Ctrl+Q> for Fast!UTILHost Adapter Settings Using Fast!UTILConfiguration Settings menu options Starting Fast!UTILSelectable Boot Settings Restore Default SettingsAdvanced Adapter Settings Raw NOVRAM dataTable 41. Advanced Adapter Settings Table 43. RIO options and operation modes Extended Firmware SettingsTable 42. Extended firmware settings Table 44. Connection optionsLoopback data test Scan Fibre Channel devicesFibre Channel disk utility ExitFast!UTILGeneral Checkout 4 Diagnostic informationGeneral Fibre Channel configuration diagram Figure 31. High level Fibre Channel architectureHardware problems Software problemsSystem configuration problems Fibre channel problems Page 5 Symptom-to-FRUindex NotesSwitch error messages Fast!UTIL utility status codesExpansion card error messages Management module error messages Switch diagnostic information LED error codesI2C diagnostic register definitions Undetermined problems Problem determination tips 1.Are the exact machine type and models 6 SBCEFCSW / SBFCM Parts listing Intel Blade Server Switch Module SBCEFCSWOption Intel Blade Server Fibre Channel Expansion CardSBFCM CRU/FRUUsing the documentation A Getting help and technical assistanceBefore you call