Setting the Configuration
For Linux
1.Press the 
button according to the number of times specified on the following table, and you will see the corresponding prompt .
KEY PRESS | PROMPT | FUNCTION | |
|
|
| |
| NIC1 IPADDR | Enter the IP address assigned to NIC 1 (Network | |
once (1) | Change? | Interface Card) | |
|
|
| |
| NIC1 NETMASK | Enter the netmask of NIC 1 | |
twice (2) | Change? |
| |
|
|
| |
| NIC2 IPADDR | Enter the IP address assigned to NIC 2 | |
thrice (3) | Change? |
| |
|
|
| |
| NIC2 NETMASK | Enter the netmask of NIC 2 | |
four (4) times | Change? |
| |
|
|
| |
| Default GW | Enter IP address of the gateway for your network | |
five (5) times | Change? |
| |
|
|
| |
| Primary DNS | Enter IP address of the primary DNS for your network | |
six (6) times | Change? |
| |
|
|
| |
| Secondary DNS | Enter IP address of the secondary DNS for your | |
seven (7) times | Change? | network | |
|
|
| |
| Reboot | Allows you to reboot the server | |
eight (8) times | Server? |
| |
|
|
| |
| Shutdown | Allows you to shutdown the server | |
nine (9) times | Server? |
| |
|
|
|
2.Press the 
button to confirm selection of the option displayed.
3.Use the 
button to increase or 
button to decrease the value.
4.Then, press the 
button to accept the data entered and return to the main screen.
NOTE: Please restart the LCD driver under Linux when you change the NIC settings from Static to DHCP by running “killall LCDdaemon”, and then running /LCD/LCDdaemon.
24
http://www.TYAN.com
