Tyan Computer B2094T15 warranty Advanced Chips et Control, Advanced Processor Options

Advanced Chips et Control

Graphics Aperture sets the memory size of AGP VGA device.

Enable Memory Gap enables or disables memory gap.

USB 2.0 Controller enables or disables USB 2.0 controller.

ECC Config allows you to enable or disable support for ECC-type of memory. Available only if you are using an ECC-type DDR- SDRAM memory.

ECC Error Type generates interrupt when an ECC error occurs. Available only if you are using an ECC-type DDR-SDRAM memory.

S ERR Signal Condition selects ECC error condition that SERR# be asserted.

Frequency Ratio Only available if you are using an unlocked processor. If the processor’s frequency multiple is locked, you will not see this item.

Advanced Processor Options

APIC Interrupt Routing turns on and initializes I/O APIC (Advanced Programmable Interrupt Controller).

Compatible FPU Code enables or disables FPU (Floating Point Unit).

I/O Device Configuration

Serial Port A/B, Base I/O Address, and Interrupt Sets the input/output address and interrupt request line (IRQ) for the on-board serial ports (COMA/COMB) controller.

Fan Speed Control enables or disables fan speed control.

Hardware Monitor Configuration The following items on your system are monitored:

•VDDQ (voltage)

•Vcc 2.5 (voltage)

•Vcc (voltage)

•+5 Vsb (voltage)

•Vcc 3 (voltage)

•Vcc P (voltage)

•CPU Temperature

•System Temperature

•FAN1 (speed)

•FAN2 (speed)

•FAN3 (speed)

Onboard Device Configuration

Onboard ATI RAGE XL enables or disables onboard ATI VGA controller.

Onboard Intel NIC1/NIC2 enables or disables onboard Intel 82551QM LAN1/LAN2 controller.

Onboard Promise RAID enables or disables onboard Promise PDC20276 controller.

Console Redirection The Console Redirection is a feature for monitoring POST messages and running Setup and DOS from a remote serial terminal.

31

http://www.TYAN.com