Tyan Computer B2094T15 warranty Viewing Drive Assignments

3.Press Y for the Create and Duplicate option. The messages as shown next will appear asking you to select the Source drive to use.

		Source Disk
Channel:ID	Drive Model	Capacity	(MB)
		Target Disk
Channel:ID	Drive Model	Capacity	(MB)
	[Please Select A Source Disk]
Channel:ID	Drive Model	Capacity	(MB)
1: Master QUANTUMCR8.4A		8063
2: Master QUANTUMCR8.4A		8063
	[− ] Up [↓ ]	[ESC] Exit [Ctrl-Y] Save

4.Use the arrow keys to select the drive containing data to be copied.

5.Press Ctrl+Y to save and start duplication.

6.Press Y when the messages appear asking if you want to continue. FastBuild Utility will then copy all data from the Source drive to the Target drive.

7.When messages appear on the screen indicating that the array has been creat ed, press any key to reboot.

7.3Viewing Drive Assignments

You can view whether drives are assigned to a disk array or are unassigned. The View Drive Assignments screen indicates the channel ID, drive model, capacity, assignment and mode (data transfer rate: U6 = 133 MB/sec, U5 = 100 MB/sec and U4 = 66 MB/sec).

To view drive assignments, access the main menu (as described in section 7.2 steps 1 and 2) and select 2.

FastBuild ™ Utility 1.xx © 199x-200x Promise Technology, Inc.

		[View Drive Assignments]
Channel:ID	Drive Model		Capacity(MB)	Assignment	Mode
1: Master QUANTUMCR8.4A		8063	Array 1	U5
2: Master QUANTUMCR8.4A		8063	Array 1	U5

[Keys Available]

[− ] Up [↓ ] Down [ESC] Exit Mode (U=UDMA, P=PIO, D=DMA)

50

http://www.TYAN.com