Three -headed data cable

NOTE: You cannot replace the cabinet cover with a CD drive installed. Restore the old connections after using the CD drive to be able to replace the cabinet cover.

Without a Secondary Hard Disk Drive Installed

1.Remove the cabinet cover (see section 6.1 in this chapter).

2.Connect one end of the data cable to the secondary IDE connector (see figure on page 44) and the other end to the rear of the CD drive.

3.Connect the power cord to the rear of the CD drive.

NOTE: You cannot replace the cabinet cover with a CD drive installed. Remove the CD drive after using it to be able to replace the cabinet cover.

46

http://www.TYAN.com

Page 45 Page 47
Page 46
Image 46
Tyan Computer B2094T15 warranty Without a Secondary Hard Disk Drive Installed
Page 45 Page 47
Top Page Image Contents