2.Locate the PCI slot.
3.Firmly press the riser card’s edge connector into the PCI slot.
4.Replace the cabinet cover.
2.2Rack Mounting
The slide rackmount kit provides a sliding rackmount solution for the product . Slides enable optimal serviceability of the server from the front of the rack, including accessibility to the rear of the server for cabling and the capability for top cover removal. It is compatible with most 19” EIA standard 4 post racks with non
After unpacking the shipping carton, you should find these standard items:
•2 moun ting ears
•2 rack slides (inner and outer slides)
•4 post slide mount adapters
•hex screws (+) and hex nuts (for outer slides)
•hex screws (for slide mount adapter – dark colored)
Inspect all the items. If any item is damaged or missing, notify your dealer immediately.
Cabinet Slides and Ears
1.Attach the mounting ears to the side near the front of the cabinet. Then secure each with two screws.
18
http://www.TYAN.com
