Cisco Systems 4300E, 4500E manual Full Screen check, Restore button, Save Settings button

Chapter 4 Viewing Live Video

Table 4-1	Camera Video/Control Window Controls (continued)
Control		Description
Full Screen check		Becomes available when you click check Enable Motion Detection check box.
box		Check the Full Screen check box to cause the IP camera to examine the entire
		video field for activity.
		You can configure the following items for this video field:
		• Sensitivity—Designates the relative amount of activity that the IP camera
		must detect in the area before it generates an alert. A lower value means
		that more, or faster, activity is required to trigger an alert. A higher value
		means that less, or slower, activity is required. The default value is 50.
		• Threshold—Designates the percentage of pixels that the IP camera must
		identify as changed in the area before it generates an alert. The camera
		monitors for pixel changes at the defined sensitivity level. The default
		threshold value is 50.
		To configure sensitivity or threshold, right-click anywhere in the video field
		border and then drag the Sensitivity and Threshold sliders to the desired
		values. Alternatively, enter a value from 1 through 100 for an option and press
		the Enter key. To reset the sensitivity and threshold to their default values of
		50, click Restore.
Restore button		Deselects all areas in the video field that you have selected for motion
		detection monitoring.
Save Settings button		Save the current motion detection configuration.

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

4-8 OL-25230-02