Chapter 2 Getting Started
Managing the Local Storage
Procedure
Step 1
Step 2 Enter the IP address and root password for the IP camera and click Connect.
Step 3 Click Format USB.
Step 4 Click Yes twice to verify that you are sure that you want to format the USB flash drive.
The USB flash drive is formatted using a FAT32 partition. If the USB flash drive was previously formatted using a different partition type, such as NTFS, you are prompted to verify that you want to format the USB flash drive using the FAT32 partition.
Downloading Encrypted Video Files from the USB Flash Drive
Procedure
Step 1
Step 2 Enter the IP address and root password for the IP camera and click Connect.
When the utility successfully connects to the IP camera, USB flash drive capacity information and a list of the encrypted video files are displayed.
Step 3 Do one of the following to choose the encrypted files that are to be downloaded to your PC:
•To choose all encrypted video files on the USB flash drive, click Select all.
•To choose some of the encrypted video files on the USB flash drive, click on the ones you want to download from the file list.
Step 4 Click Save.
The selected files are copied to the specified directory, leaving the original files on the USB flash drive.
What to Do Next
To view the encrypted video files that have been downloaded, you must decrypt them. For more information, see the “Decrypting Encrypted Video Files” section on page
Deleting Encrypted Video Files from the USB Flash Drive
Procedure
Step 1
Step 2 Enter the IP address and root password for the IP camera and click Connect.
When the utility successfully connects to the IP camera, USB flash drive capacity information and a list of the encrypted video files are displayed.
|
| Cisco Video Surveillance 4300E and 4500E |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
|