Chapter6 Maintaining the Content E ngine
Maintaining Your Site Environment
6-4
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Corrosion
The oil from a person’s fingers or prolonged exposure to high temperature or
humidity can corrode the gold-plated edge connectors and pin connectors on
various devices in the system. This corrosion on system connectors is a gradual
process that can eventually lead to intermittent failures of electrical circuits.
To prevent corrosion, you should avoid touching contacts on boards and cards.
Protecting the system from corrosive elements is especially important in moist
and salty environments, which tend to promote corrosion. Also, as a further
deterrent to corrosion, the system should not be used in extreme temperatures, as
explained in the “Temperature” section on page6-2.
Electrostatic Discharge
Electrostatic discharge (ESD) results from the buildup of static electricity on the
human body and certain other objects. This static electricity is often produced by
simple movements such as walking across a carpet. ESD is a discharge of a static
electrical charge that occurs when a person whose body contains such a charge
touches a component in the system. This static discharge can cause components,
especially chips, to fail. ESD is a problem particularly in dry environments where
the relative humidity is below 50 percent.
To reduce the effects of ESD, you should observe the following guidelines:
•Wear a grounding wrist strap. If a grounding wrist strap is unavailable, touch
an unpainted metal surface on the chassis periodically to neutralize any static
charge.
•Keep components in their antistatic packaging until they are installed.
•Avoid wearing clothing made of wool or synthetic materials.