Using the User Options Web Pages
Cisco Unified IP Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP) 73
Configuring Fast Dials on the Web
This section describes how to assign Fast Dials from your User Options web pages.
Edit a PAB entry 1. Search for a PAB entry.
2. Click a name or nickname.
3. Edit the entry as needed and click Save.
Delete a PAB entry 1. Search for a PAB entry.
2. Select one or more entries and click Delete Selected.
If you want to... Then do this after you log in...
Assign a Fast Dial code to a
PAB en try
1. Create a PAB entry. See Using Your Personal Address Book on the
Web, page 72.
2. Choose User Options > Fast Dials.
3. Click Add New.
4. To find the appropriate PAB entry, use the Search Options area.
5. In the Search Results area, click a phone number.
6. Change the Fast Dial code, if desired, and click Save.
Assign a Fast Dial code to a
phone number (without
using a PAB entry)
1. Choose User Options > Fast Dials.
2. Click Add New.
3. Change the Fast Dial code, if desired.
4. Enter a phone number and click Save.
Assign a line button for
Fast Dial
Note Before you can assign a line button for Fast Dial, your system
administrator must configure the phone to display services. Contact
your system administrator for more information.
1. Choose User Options > Device.
2. Click Service URL.
3. From the Button drop-down list box, choose the Fast Dial service.
4. Enter a phone label for the button and then click Save.
5. To refresh the phone configuration, click Reset and then Restart.
You can now press the line button to access the Fast Dial codes.
Search for a Fast Dial entry 1. Choose User Options > Fast Dials.
2. Specify search information and click Find.
If you want to... Then do this after you log in...