Cisco Systems 7975G manual Using cBarge, Tip

Using cBarge

You can create a conference by using cBarge to add yourself to a call on a shared line.

If you want to...	Then...
Create a conference by	Press the line button for the shared line.
barging a call on a shared line	In some cases, you must highlight the call and press cBarge to
	complete the action.
	See Using Barge to Add Yourself to a Shared-Line Call, page 43 for
	more information.
See a list of participants or	See Viewing or Removing Conference Participants, page 37.
remove participants

Using Meet-Me

Meet-Me conferencing enables you to start or join a conference by calling the conference number.

If you want to...	Then...
Start a Meet-Me	1.	Obtain a Meet-Me phone number from your system administrator.
conference	2.	Distribute the number to participants.

3.When you are ready to start the meeting, go off-hook to get a dial tone, then press MeetMe.

4.Dial the Meet-Me conference number.

	Participants can now join the conference by dialing in.
	Note Participants hear a busy tone if they call the conference before the initiator
	has joined. In this case, participants must call back.
Join a Meet-Me	Dial the Meet-Me conference number (provided by the conference initiator).
conference	Note You will hear a busy tone if you call the conference before the initiator has
	joined. In this case, try your call again.
End a Meet-Me	All participants must hang up.
conference	The conference does not automatically end when the conference
	initiator disconnects.

Tip

If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the message, “Device Not Authorized.” For more information, see Making and Receiving Secure Calls, page 47.

36 OL-22332-01