Connecting Cables to the Router
Connecting a Server, PC, or Workstation
TO HUB
TO PC
ETHERNET 10 BASE T
1
2
3
Cisco 804 | IDSL | |
CONSOLE | ||
|
4
IDSL
+5,
Cisco 804 IDSL Router
PC
AUX |
|
|
0 | OK | LAN |
SER |
|
|
AUX |
|
|
Connect the yellow cable to one of the following ports:
•The yellow Ethernet port on your Cisco 802 IDSL router.
•Any of the yellow Ethernet ports on your Cisco 804 IDSL router.
Step 1 Connect the other end of the cable to the server, PC, or workstation.
Step 2 Check the LED corresponding to the connected port after router
•The LINK LED is on the Cisco 802 IDSL back panel.
•ETHERNET 1, 2, 3, and 4 LEDs are on the Cisco 804 IDSL front panel.
Step 3 If the LINK or ETHERNET 1 LED is not on, try pressing the TO HUB/TO PC button.
Step 4 If the ETHERNET 2, 3, or 4 LED is not on, see the Cisco 800 Series Routers Hardware Installation Guide.
Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers
8 |
| |
|