![](/images/new-backgrounds/1170300/170300271x1.webp)
Chapter 4 Installation in a Hazardous Environment
Preparing for Installation
Preparing for Installation
This section provides information about these topics:
•Warnings, page
•EMC Regulatory Statements, page
•Installation Guidelines, page
•Verifying Package Contents, page
Warnings
These warnings are translated into several languages in Appendix C, “Translated Safety Warnings.”
Warning This equipment is to be installed and maintained by service personnel only as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel. Statement 88
Warning Only trained and qualified personnel should be allowed to install or replace this equipment. Statement 49
Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning Read the installation instructions before you connect the system to its power source. Statement 1004
Warning Do not stack the chassis on any other equipment. If the chassis falls, it can
cause severe bodily injury and equipment damage. Statement 48
| Catalyst 2955 Hardware Installation Guide |