THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures:

•Turn the television or radio antenna until the interference stops.

•Move the equipment to one side or the other of the television or radio.

•Move the equipment farther away from the television or radio.

•Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television or radio are on circuits controlled by different circuit breakers or fuses.)

Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Page 1 Page 3
Page 2
Image 2
Cisco Systems Catalyst 2955 manual
Page 1 Page 3

Catalyst 2955 specifications

The Cisco Systems Catalyst 2955 is a robust and versatile Ethernet switch designed for enterprises seeking reliable Layer 2 switching capabilities. Known for its steadfast performance and extensive feature set, the Catalyst 2955 is particularly favored for environments requiring high-density connectivity and advanced traffic management.

One of the hallmark features of the Catalyst 2955 is its support for IEEE 802.1Q VLAN tagging, which allows for efficient traffic segregation and helps improve network security. The switch can handle up to 256 virtual LANs, supporting a more organized network structure and optimized resource allocation. This VLAN capability is crucial for businesses that need to segment their networks for various departments or applications while maintaining efficient communication between them.

The Catalyst 2955 is equipped with a comprehensive Quality of Service (QoS) mechanism, which prioritizes critical applications and ensures that voice, video, and data traffic receive appropriate bandwidth. By providing features such as classification, marking, queuing, and congestion avoidance, the switch helps meet the demands of real-time applications, thereby enhancing user experience and productivity.

Another remarkable technology integrated into the Catalyst 2955 is Spanning Tree Protocol (STP), which prevents loops in redundant network connections. Enhanced with features like Rapid Spanning Tree Protocol (RSTP), this switch minimizes downtime by allowing for quicker convergence times in case of topology changes. The ability to support both STP and RSTP is vital for maintaining network stability and performance.

The Catalyst 2955 is also designed with network management and monitoring in mind. It includes features like Simple Network Management Protocol (SNMP), which enables administrators to manage network resources effectively and troubleshoot issues more efficiently. With support for Cisco’s proprietary software, it offers insights into traffic patterns and usage statistics that can aid in maintaining optimal network health.

Physical characteristics of the Catalyst 2955 include various configurations with either 24 or 48 ports, suitable for different deployment scenarios. The switch is designed for rack mounting, making it an ideal solution for data centers and enterprise networks where space is a consideration.

In summary, the Cisco Systems Catalyst 2955 stands out for its solid Layer 2 functionality, VLAN support, QoS capabilities, network stability features such as STP, and extensive management tools, making it an excellent choice for organizations aiming to enhance network resiliency and performance. Its balance of performance and manageability continues to make it a viable option in the competitive landscape of networking equipment.
Top Page Image Contents