Cisco Systems manual Catalyst 2955 Switch Top Panel

Chapter 3 Installation

Installing the Switch on a DIN Rail

Figure 3-27 Catalyst 2955 Switch Top Panel

104561

1 3 2

1

2

Catalyst 2955 switch top panel 3 DIN rail clip mounting screws

DIN rail clip assembly

To attach the switch to a DIN rail, follow these steps.

Step 1 Position the rear panel of the switch directly in front of the DIN rail, making sure that the top of the DIN rail clip hooks over the top of the DIN rail, as shown in Figure 3-28and Figure 3-29.

	Catalyst 2955 Hardware Installation Guide
3-54	78-14944-03