Cisco Systems Catalyst 2955 manual Power and relay connector captive screws

Chapter 3 Installation

Verifying Switch Operation

Step 6 Use a ratcheting torque flathead screwdriver to torque the power and relay connector captive screws (above the installed wire leads) to 4.5 in-lbs. (72 ozf-in.). (See Figure 3-8.)

Caution Do not overtorque the power and relay connector captive screws. The recommended maximum torque is 4.5 in-lbs.

Figure 3-8 Torquing the Power and Relay Connector Captive Screws

			1
VA
RT
A1	A2	A2	A1	RT
				VB

97486

1

Power and relay connector captive screws

	Catalyst 2955 Hardware Installation Guide
78-14944-03		3-21