![](/images/new-backgrounds/1277183/2771833x1.webp)
QSIG/DPNSS Phone System with Cisco EGW 2200 Integration Guide for Cisco Unity Connection 1.1
Requirements
6.Test the integration. See the “Testing the Integration” section on page 9.
7.If this integration is a second or subsequent integration, add the applicable new user templates for the new phone system. See the (Multiple Integrations Only) Adding New User Templates, page 13.
Task List to Make Changes to an Integration
Use the following task list to make changes to an integration after it has been created.
1.Start Cisco Unity Connection Administration.
2.Make the changes you want to the existing integration. See the “Changing the Settings for an Existing Integration” section on page 13.
Task List to Delete an Existing Integration
Use the following task list to remove an existing integration.
1.Start Cisco Unity Connection Administration.
2.Delete the existing integration. See the “Deleting an Existing Phone System Integration” section on page 14.
Requirements
The QSIG/DPNSS integration supports configurations of the following components:
Phone System
•A QSIG/DPNSS phone system.
•The phone system ready for the integration as described in the installation guide for the phone system and the Cisco EGW 2200 documentation.
•A VoIP gateway configured and connected to the QSIG/DPNSS phone system.
Cisco Unity Connection Server
•Cisco Unity Connection installed and ready for the integration, as described in the Cisco Unity Connection Installation Guide at http://www.cisco.com/en/US/products/ps6509/prod_installation_guides_list.html.
•A license that enables the applicable number of voice messaging ports.
•A Cisco EGW 2200 ready for the integration as described in the Cisco EGW 2200 documentation.
•The Cisco EGW 2200 connected to the LAN and configured for a QSIG/DPNSS backhaul signaling stream from the VoIP gateway.
Integration Description
The QSIG/DPNSS integration uses a Cisco EGW 2200, which translates QSIG or DPNSS call signaling into SIP, a VoIP gateway, and the LAN to connect Cisco Unity Connection and a QSIG/DPNSS phone system. Figure 1 shows the required connections.
QSIG/DPNSS Phone System with Cisco EGW 2200 Integration Guide for Cisco Unity Connection 1.1
2 |
| |
|