Cisco Systems EGW 2200 Test User, Uncheck the Set for Self-enrollment at Next Login check box

QSIG/DPNSS Phone System with Cisco EGW 2200 Integration Guide for Cisco Unity Connection 1.1

Testing the Integration

	Table 6	Settings for the New User Page (continued)
	Field		Setting
	Display Name		Test User
	Extension		<the extension of Phone 1>
Step 6	Click Save.
Step 7	On the User Basics page, in the Voice Name field, record a voice name for the test user.
Step 8	In the Phone System field, confirm that the phone system selected is the phone system that Phone 1 is
	connected to.
Step 9	Uncheck the Set for Self-enrollment at Next Login check box.
Step 10	Click Save.
Step 11	On the Edit menu, click Message Waiting Indicators.
Step 12	On the Message Waiting Indicators page, click the message waiting indicator. If no message waiting
	indication is in the table, click Add New.
Step 13	On the Edit Message Waiting Indicator page, enter the following settings.
	Table 7	Settings for the Edit MWI Page
	Field		Setting
	Enabled		Check this check box to enable MWIs for the test user.
	Display Name		Accept the default or enter a different name.
	Inherit User’s		Check this check box to enable MWIs on Phone 1.
	Extension
	Extension		<the extension of Phone 1>
	Phone System		<the phone system that Phone 1 is connected to>
Step 14	Click Save.
Step 15	On the Edit menu, click Transfer Options.
Step 16	On the Edit Transfer Option page, under Call Transfer, click the Extension option and enter the
	extension of Phone 1.
Step 17	In the Transfer Type field, click Release to Switch.
Step 18	Click Save.
Step 19	Minimize the Cisco Unity Connection Administration window.
	Do not close the Cisco Unity Connection Administration window because you will use it again in a later
	procedure.
Step 20	On the Cisco Unity Connection desktop, double-click the Tools Depot icon.
Step 21	In the left pane of the Tools Depot window, expand Switch Integration Tools, then double-click Port
	Status Monitor. The Port Status Monitor window appears.
Step 22	On the Ports menu, click Start All, and arrange the port monitors so that you can notice which port will
	handle the calls that you will make.

QSIG/DPNSS Phone System with Cisco EGW 2200 Integration Guide for Cisco Unity Connection 1.1

10 OL-8187-01