Cisco Systems H.323 manual Prov-stasrcver=version,dstver=version

Appendix A MML User Interface and Command Reference

prov-sta

prov-sta

The prov-stacommand establishes a provisioning session. The data files are copied from the source version to the destination version.

prov-sta::srcver=version,dstver=version

Syntax Description			srcver=version	Selects a specific configuration version as the source for configuration
				changes. The srcver variable represents a directory that exists in
				$GWBASE/var/prov/. In place of the configuration version, you can also
				enter:
				• new—Specifies a new default session configuration; no existing source
				configuration is used.
				• active—Selects the active configuration as the source for configuration
				changes.
			dstver=version	Specifies the output version directory for the configuration session results.
				The dstver variable represents a directory stored in $GWBASE/var/prov/.
Usage Guidelines			If the source and destination filenames are the same, the new configuration overwrites the old
			configuration. It is a good practice to copy an existing configuration instead of overwriting it so that you
			can return to a known configuration if there are problems with the new one.
			If the source provisioning session has not been verified, the message “Note: This provisioning session
			has not been verified” is displayed, but the session starts normally.
			If you try to start with a provisioning session that does not exist, an error is displayed, along with a list
			of available sessions.
			The MML command in the following example starts a provisioning session named nowt and creates a
Examples
			new configuration named blah:
			gw mml> prov-sta::srcver=nowt,dstver=blah
			H323 Signaling Interface Sun Jan 7 13:32:07 2000
			M DENY
			The provisioning session called "nowt" does not exist.
			The following configurations are available:
			sanfran2 uk9 final
			telco mgcpvia miki
			transit dave matt
			The MML command in the following example starts a provisioning session and creates a new
			configuration named ver1:
			gw mml> PROV-STA::SRCVER="new", DSTVER="ver1"
			H323 Signaling Interface Sun Jan 7 13:32:07 2001
			M SUCC
			Successfully started provisioning session "ver1" from "new".
			The MML command in the following example starts a provisioning session, opens the existing
			configuration named ver1, and overwrites that configuration:
			gw mml> PROV-STA::SRCVER="ver1", DSTVER="ver1"
		Cisco H.323 Signaling Interface User Guide
	A-20			OL-4806-01 Rev. A14