Cisco Systems H.323 manual Clr-almcommand clears an alarm event, Clr-almevent=alarm event

Appendix A MML User Interface and Command Reference

clr-alm

clr-alm

The clr-almcommand clears an alarm event.

clr-alm:event=alarm event

Syntax Description	alarm event	The alarm event name or the text that appears in the body of the alarm.
		Alarm names are defined in Chapter 5, “Troubleshooting Cisco HSI
		Alarms.”
	The alarm category must match the format shown in the alarm when the rtrv-almscommand displays
Usage Guidelines
	it. It is case sensitive.
	This example clears the alarm event VSC_FAILURE.
Examples
	gw mml> clr-alm:event=VSC_FAILURE
	GW Signaling Interface		2000-12-05 14:19:22
	M SUCC
	mml>
Related Commands	Command		Description
	ack-alm		Acknowledges that an alarm event is recognized but does not clear the
			alarm.
	rtrv-alms		Displays all active alarms
clr-meas
	The clr-meascommand resets a measurement counter.
	clr-meas:counter group:name=measurement name
	clr-meas:counter group
Syntax Description	counter group	Valid counter groups are:
		•	RAS
		•	Q931
		•	H245
	measurement name	For a list of measurement names, see Table 4-1, Table 4-2, and Table 4-3.

	Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14		A-9