Cisco Systems H.323 manual Diaglog, Examples

Appendix A MML User Interface and Command Reference

diaglog

Examples	In this example, a measurement counter, GK_DISC_ATT_TOT (Gatekeeper Discovery Attempts), is
	reset in the counter group RAS:
	gw	mml> clr-meas:RAS
	GW	Signaling Interface	2000-12-05 14:19:22

MSUCC

mml>

	mml> clr-meas:RAS:name=GK_DISC_ATT_TOT
	GW Signaling Interface	2000-12-05 14:19:22
	M SUCC
Related Commands	Command	Description
	rtrv-ctr	Displays the measurements for a counter group.
diaglog
	The diaglog command starts and stops event logging into a diagnostics log.
	diaglog:file name:start stop
Syntax Description	file name	The user-defined name of the log file. The actual file name has a .log suffix
		applied. The file is located in the logging directory defined in the
		configuration data (see Chapter 3, “Provisioning the Cisco HSI”).
	In this example, event logging is started in a diagnostics log named test5.
Examples
	gw mml> diaglog:test5:start
	test5_davek15823_20010130053323.log
	In the preceding example, davek is the user who runs the command, and 15823 is the process ID of the
	MML process from which the command is run.
Related Commands	Command	Description
	radlog	Starts and stops RADVision logging into a specified log file.
	rtrv-log	Displays the logging level of a package or all packages.
	set-log	Sets the logging level of a package or all packages.

	Cisco H.323 Signaling Interface User Guide
A-10	OL-4806-01 Rev. A14