Manuals / Cisco Systems / Computer Equipment / Network Card

Cisco Systems H.323 manual Gappedcallnormal

Models: H.323

1 199
Download 199 pages 45.03 Kb
Page 97
Image 97

Chapter 5 Troubleshooting Cisco HSI Alarms

Troubleshooting

GAPPED_CALL_NORMAL

Description

A normal call has been rejected due to call gapping. This informational event is reported to the management interface and can be obtained with SNMP.

Severity Level and Trap Type

The severity level is information. The trap type is 2.

Cause

The GAPPED_CALL_NORMAL alarm is triggered when gapping levels cause a normal call to be rejected.

Troubleshooting

To clear the GAPPED_CALL_NORMAL informational event, complete the following steps:

Step 1 Use the rtrv-gappingMML command to retrieve gapping information.

Step 2 If the MML-specific gap levels are active, use the set-gappingMML command to modify them.

Step 3 If the overload-specific gap levels are active, either modify the provisioned overload gapping percent levels or reduce the cause of the overload (see OVERLOAD_LEVEL1, page 5-14, OVERLOAD_LEVEL2, page 5-11, and OVERLOAD_LEVEL3, page 5-9).

GAPPED_CALL_PRIORITY

Description

A priority or emergency call has been rejected due to call gapping. This informational event is reported to the management interface and can be obtained with SNMP.

Severity Level and Trap Type

The severity level is information. The trap type is 2.

Cause

The GAPPED_CALL_NORMAL alarm is triggered when gapping levels cause a priority or emergency call to be rejected.

 

 

Cisco H.323 Signaling Interface User Guide

 

 

 

 

 

 

OL-4806-01 Rev. A14

 

 

5-13

 

 

 

 

 

Page 96 Page 98
Page 97
Image 97
Cisco Systems H.323 manual Gappedcallnormal
Page 96 Page 98

H.323 specifications

Cisco Systems H.323 is a set of standards designed for transmitting audio, video, and data over packet-switched networks. It is a critical technology that enables real-time communication and has become integral to the world of VoIP (Voice over Internet Protocol) and video conferencing applications. Originally developed by the ITU-T, H.323 has been widely adopted and implemented by Cisco Systems, allowing organizations to leverage reliable and scalable communication solutions.

One of the standout features of H.323 is its ability to support interoperability among varying equipment and platforms. This means that devices from different manufacturers can communicate seamlessly, which is vital in a diverse technical environment. H.323 does this by defining protocols that handle signaling, media transport, and control, ensuring that various systems can work together effectively.

Key technologies utilized within H.323 include H.225 and H.245 signaling protocols. H.225 is responsible for call setup and management, establishing communication between endpoints. In contrast, H.245 manages the negotiation of media channels, allowing devices to configure themselves based on the capabilities of each other. This adaptability is crucial for dynamic network conditions typical in VoIP applications.

Another defining characteristic of H.323 is its support for multiple types of multimedia communication, including point-to-point and multipoint calls. This flexibility supports everything from simple audio calls to complex videoconferencing setups, where many participants can share video and audio streams concurrently. Cisco enhances this capability through its hardware and software offerings, optimizing performance for conference calls.

H.323 also features robust error resilience mechanisms. This ensures that real-time data, which is typically sensitive to delays and losses, can be transmitted with minimal disruption. Moreover, it facilitates quality of service (QoS) implementation, allowing organizations to prioritize voice and video traffic over less critical data services, thereby improving the overall user experience.

In conclusion, Cisco Systems H.323 stands out as a comprehensive solution for real-time communication over packet-based networks. Its main features, including interoperability, multimedia support, and enhanced error resilience, position it as a relevant technology in both corporate and personal communication settings. As organizations continue to adopt cloud and hybrid communication models, H.323 remains a reliable backbone for ensuring connectivity and collaboration across diverse platforms.